{"title":"Dual-Lite Battery Packs","description":"","products":[{"product_id":"dual-lite-atsd","title":"Dual-Lite ATSD 120\/277VAV Auxilary Transfer Switch","description":"\u003cp\u003e\n\t\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n\tThe ATSD auxiliary transfer switch works in conjunction with an emergency lighting inverter or an auxiliary generator to power switched or dimmed emergency lighting fixtures up to 3A. The auxiliary transfer senses the loss of normal power and bypasses the switch or dimmer, transferring the lighting load to a designated emergency power source, regardless of the switch or dimmer position. Recommended applications include: auditoriums, classrooms, or any other location with generator or inverter-supplied emergency lighting.\n\u003c\/p\u003e\n\u003cp\u003e\n\t\u003cbr\u003e\n\t\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n\tThe ATSD consists of relay switching circuitry and fusing in one compact galvanized steel case. The auxiliary transfer switch device is suitable for use indoor-dry or damp location fixture.\n\u003c\/p\u003e\n\u003cp\u003e\n\t\u003cbr\u003e\n\t\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n\tThe ATSD auxiliary transfer device does not affect normal fixture operation and comes fully assembled to mount in the fixture ballast channel. In addition to available wiring, the device requires a direct, unswitched connection to a generator or inverter-supplied emergency panel and an unswitched source on the same branch circuit as the switched supply. One auxiliary transfer switch device per fixture can be used to bypass fixture wall switch allowing the building generator to bring on switchable fixture and not just those on “night-light” circuits. (See diagram on second page of PDF Specification)\n\u003c\/p\u003e\n\u003cp\u003e\n\t\u003cbr\u003e\n\t\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n\tThe ATSD auxiliary transfer switching device works in conjunction with an auxiliary generator or inverter power system to power existing fixtures for egress lighting regardless of fixture wall switch position.\n\u003c\/p\u003e\n\u003cp\u003e\n\t\u003cbr\u003e\n\t\u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n\tUL 924 Listed\n\u003c\/p\u003e\n\u003cp\u003e\n\t\u003cbr\u003e\n\t\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n\tUnit and Electronics: 5 years full\n\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441574207795,"sku":"Dual-Lite-ATSD","price":296.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-ATSD-2.jpg?v=1734123028"},{"product_id":"dual-lite-atsd20","title":"Dual-Lite ATSD20 20 Amp Auxilary Transfer Switch","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The ATSD20 works in conjunction with an emergency lighting inverter or auxiliary generator to power switched and dimmed emergency lighting loads up to 20 Amps. The device senses the loss of normal power and, in response, switches the lighting load to a designated emergency source. This allows for a switch or dimmer to be overridden\u003cbr\u003e\n  so that full emergency power can be provided to the designated fixtures, regardless of switch position. The switch is compatible with all lamp types, although HID type lamps are not recommended as the time to achieve full illumination may not be acceptable to NFPA 101 standards when switching to emergency power from an off position.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003e\n  Construction\u003c\/b\u003e\u003cbr\u003e\n  The ATSD20 enclosure and cover are constructed of 20 gauge steel with a gray paint finish and is surface mountable.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The ATSD20 does not affect normal fixture operation and comes fully assembled for immediate installation. In addition to available wiring, the device requires a direct, unswitched connection to a normal power circuit and, depending on the application, an unswitched connection to a generator-supplied or central inverter system-supplied emergency panel. (See diagram on second page of PDF Specification)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL Damp location listed\u003cbr\u003e\n  UL 1008 Listed (Transfer Switch Equipment)\u003cbr\u003e\n  NFPA 101 Life Safety Code\u003cbr\u003e\n  NFPA 70 National Electrical Code\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  Unit and Electronics: 5 years full\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441574240563,"sku":"Dual-Lite-ATSD20","price":417.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-ATSD20-2.jpg?v=1734123044"},{"product_id":"dual-lite-pld10","title":"Dual Lite PLD10 10W LED Battery Pack, 120-277V, Polycarbonate Thermoplastic","description":"\u003cb\u003eApplication\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe Dual-Lite PLD10 is a universal input (120-277V) emergency\nLED battery pack that works with an AC LED driver to allow an LED\nlighting load to be used in both normal and emergency operation. \u003c\/li\u003e\n\u003cli\u003eWhen normal AC power is lost, the PLD10 operates to provide 10\nwatts of constant emergency power at a rated output voltage of\n20-56Vdc. \u003c\/li\u003e\n\u003cli\u003eThe constant power design provides backup for a\nminimum of 90 minutes with no loss of emergency lumen output. \u003c\/li\u003e\n\u003cli\u003eWhen used with emergency-only LED fixtures, no AC driver is\nneeded. \u003c\/li\u003e\n\u003cli\u003eThe UL924 Listing allows for both field and factory\ninstallations of suitable LED loads including LED luminaires, DC\nvoltage driven LED replacements for fluorescent lamps and others. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe Dual-Lite PLD10 consists of a compact case constructed of\npolycarbonate thermoplastic. \u003c\/li\u003e\n\u003cli\u003eThe unit contains a solid-state charger\nwith automatic transfer circuit, a 2-wire test switch and LED charging\nindicator light, and a high-temperature, Nickel-Cadmium battery. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eInstallation\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe PLD10 emergency battery pack does not affect normal LED\nfixture operation and may be used with either switched or unswitched\nfixtures. \u003c\/li\u003e\n\u003cli\u003eIf a switched fixture is used, an unswitched hot lead must be\nconnected to the emergency ballast. \u003c\/li\u003e\n\u003cli\u003eThe emergency battery packs\nmust be fed from the same branch circuit as the AC LED driver. \u003c\/li\u003e\n\u003cli\u003eDue to\nits thermoplastic construction, the PLD10 must either be installed\ninside the fixture, or enclosed if remote mounted outside the\nfixture. \u003c\/li\u003e\n\u003cli\u003eThe PLD10 emergency battery pack is suitable for use in\ndamp locations where the ambient temperature is between 0°C\n(32°F) and 55°C (131°F). \u003c\/li\u003e\n\u003cli\u003eIt is not suitable for installation in\nheated air outlet fixtures and wet or hazardous location fixtures. \u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eIllumination\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe PLD10 will operate an LED load, that has a power rating of 10\nwatts or greater, for a minimum of 90 minutes.\u003c\/li\u003e\n\u003cli\u003eUsing the LED\nload’s efficacy in lm\/w, as published by the Design Lights\nConsortium website, Energy\nStar - Certified Products or given by the luminaire manufacturer\non product catalog specification sheets, lumen output can be\ncalculated by multiplying by the PLD10 output power (10w). \u003c\/li\u003e\n\u003cli\u003eCompliances\nUL 924 Recognized and Damp Location Listed for field installation\nUL 1310 Certified (Class 2 output)\nCSA C22.2 No. 141 (Canadian Life Safety Standard)\nNFPA 101 (Life Safety Code)\nNFPA 70 ( National Electrical Code)\nCEC-400-2014-009-CMF (CEC Battery Charger Efficiency Standard)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e5 Year Full Warranty","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441777008947,"sku":"Dual-Lite-PLD10","price":214.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-PLD10-2.jpg?v=1734129846"},{"product_id":"dual-lite-pld10m","title":"Dual Lite PLD10M 10W LED Battery Pack, 120-277V, Galvanized Steel","description":"\u003cb\u003eApplication\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe Dual-Lite PLD10M is a universal input (120-277V) emergency\nLED battery pack that works with an AC LED driver to allow an LED\nlighting load to be used in both normal and emergency operation.\u003c\/li\u003e\n\u003cli\u003eWhen normal AC power is lost, the PLD10M operates to provide 10\nwatts of constant emergency power at a rated output voltage of\n20-56Vdc.\u003c\/li\u003e\n\u003cli\u003eThe constant power design provides backup for a\nminimum of 90 minutes with no loss of emergency lumen output.\u003c\/li\u003e\n\u003cli\u003eWhen used with emergency-only LED fixtures, no AC driver is\nneeded.\u003c\/li\u003e\n\u003cli\u003eThe UL924 Listing allows for both field and factory\ninstallations of suitable LED loads including LED luminaires, DC\nvoltage driven LED replacements for fluorescent lamps and others.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe Dual-Lite PLD10M consists of a compact case constructed of\ndurable, galvanized steel.\u003c\/li\u003e\n\u003cli\u003eThe unit contains a solid-state charger\nwith automatic transfer circuit, a 2-wire test switch and LED charging\nindicator light, and a high-temperature, Nickel-Cadmium battery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eInstallation\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe PLD10M emergency battery pack does not affect normal LED\nfixture operation and may be used with either switched or unswitched\nfixtures.\u003c\/li\u003e\n\u003cli\u003eIf a switched fixture is used, an unswitched hot lead must be\nconnected to the emergency ballast.\u003c\/li\u003e\n\u003cli\u003eThe emergency battery packs\nmust be fed from the same branch circuit as the AC LED driver.\u003c\/li\u003e\n\u003cli\u003eDue to\nits steel construction, the PLD10M is designed to be mounted outside\nthe LED fixture.\u003c\/li\u003e\n\u003cli\u003eThe PLD10M emergency battery pack is suitable for\nuse in damp locations where the ambient temperature is between 0°C\n(32°F) and 55°C (131°F).\u003c\/li\u003e\n\u003cli\u003eIt is not suitable for installation in heated air\noutlet fixtures and wet or hazardous location fixtures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eIllumination\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe PLD10M will operate an LED load, that has a power rating of 10\nwatts or greater, for a minimum of 90 minutes.\u003c\/li\u003e\n\u003cli\u003eUsing the LED\nload’s efficacy in lm\/w, as published by the Design Lights\nConsortium website, Energy\nStar - Certified Products or given by the luminaire manufacturer\non product catalog specification sheets, lumen output can be\ncalculated by multiplying by the PLD10M output power (10w).\u003c\/li\u003e\n\u003cli\u003eCompliances\nUL 924 Recognized and Damp Location Listed for field installation\nUL 1310 Certified (Class 2 output)\nCSA C22.2 No. 141 (Canadian Life Safety Standard)\nNFPA 101 (Life Safety Code)\nNFPA 70 ( National Electrical Code)\nCEC-400-2014-009-CMF (CEC Battery Charger Efficiency Standard)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e5 Year Full Warranty","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441777402163,"sku":"Dual-Lite-PLD10M","price":214.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-PLD10M-2.jpg?v=1734129863"},{"product_id":"dual-lite-pld7m","title":"Dual Lite PLD7M 7W Emergency Battery Pack, Galvanized Steel with One 24\" Conduit","description":"","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441778221363,"sku":"Dual-Lite-PLD7M","price":184.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-PLD7M-2.jpg?v=1734129880"},{"product_id":"dual-lite-sprts","title":"Dual-Lite SPRTS Single-Pole Remote Test Switch\/Charge Indicator for Use with Dual-Lite's UFO-3AW, 4W, 5W, 6W, 7W, CF, LP, and LED Series Emergency Battery Packs","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The SPRTS remote test switch and charge indicator is used with \n  Dual-Lite’s UFO-3AW, 4W, 5W, 6W, 7W, CF, LP, and LED Series emergency battery packs to provide test and charge indicator \n  capability to a convenient wall location.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The SPRTS remote test switch\/charge indicator is constructed of a\n  UL\/CSA-approved white faceplate sized to fit a single-gang electrical\n  box, a UL\/CSA-approved single-pole, normally-closed, momentary test\n  switch and a UL\/CSA-approved single red LED charging indicator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The SPRTS can be located up to 50ft from the battery pack it is used\n  with. Refer to the individual battery pack’s Installation Instructions for appropriate wiring diagrams. The UFO-CF and UFO-LED Series battery\n  packs are individually provided with (1) SPRTS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperation\u003c\/strong\u003e\u003cbr\u003e\n  To manually test for proper operation of UFO-3AW, 4W, 5W, 6W, 7W, CF,\n  LP and LED Series battery packs, push and hold the test button. This\n  will simulate a loss of utility power causing the battery pack’s automatic\n  transfer circuit to switch to emergency mode and illuminate one or two\n  lamps, depending on the specific battery pack and fixture combination.\u003cbr\u003e\n  When the test buttion is not pressed, and therefore not in emergency\n  mode, the charging indicator LED will illuminate if the battery pack is properly being recharged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Features Include\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFor use with Dual-lite Lampak® UFO-3AW, 4W, 5W, 6W, 7W, CF, LP, and LED Series emergency battery packs\u003c\/li\u003e\n  \u003cli\u003eFor remote installation of the test switch and charge-rate indicator on wall in convenient testing area\u003c\/li\u003e\n  \u003cli\u003eCan be mounted up to 50 ft. from unit\u003c\/li\u003e\n  \u003cli\u003eCan be used with emergency battery packs supplied with a single-pole test switch\u003c\/li\u003e\n  \u003cli\u003eFits single-gang electrical box (not supplied)\u003cbr\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL924 (in use with specified battery pack)\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  1 Years Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441787691315,"sku":"Dual-Lite-SPRTS","price":49.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-SPRTS-2.jpg?v=1734130817"},{"product_id":"dual-lite-ufo-3aw","title":"Dual-Lite UFO-3AW 32W-40W (2' - 4') T8, T10, or T12 Fluorescent Emergency Battery Pack, 350-450 Lumens","description":"\u003cp\u003e\u003cstrong\u003eApplication  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-3AW emergency battery pack works in conjunction with  a fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. The UFO-3AW can  be used with one 32W through 40W (2’ - 4’) T8, T10, or T12 fluorescent  lamp without integral starters, including U-shaped, HO, VHO and  circline. It is also compatible with most 1, 2, 3, and 4-lamp electronic,  standard magnetic, end-of-lamp-life and dimming AC ballasts. If  used in an emergency-only fixture, no AC ballast is necessary. For  information about specific lamps and ballast compatibility, please  contact the factory. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a solid-state  charger with automatic transfer circuit, test switch, LED charge indicator  light, a dependable, high-frequency inverter and a high-temperature,  Nickel-Cadmium battery. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eModel UFO-3AW emergency battery pack does not affect normal  fixture operation and may be used with either a switched or unswitched  fixture. If a switched fixture is used, an unswitched hot lead must be  connected to the emergency battery pack. The emergency battery  pack must be fed from the same branch circuit as the AC ballast. The  UFO-3AW may be installed inside, on top of, or remote from the fixture.  The emergency battery pack may be remotely installed up to half the  distance from the lamp the AC ballast manufacturer recommends, or  up to 50 feet, whichever is less. UFO-3AW emergency battery packs  are not suitable for installation in heated air outlet fixtures and wet  or hazardous location fixtures. Installation is not recommended with  fixtures where the ambient temperature may fall below 0°C (32°F). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-3AW produces 350-450 lumens initial emergency light  output. During emergency illumination, one lamp is illuminated, even if  installed with a multi-lamp fluorescent fixture. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliances  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eUL 924 Damp Locatio\u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003en Listed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan\u003eNFPA 101 (Life Safety Code)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNFPA 70 (National Electrical Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarranty  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5 Years Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441792901427,"sku":"Dual-Lite-UFO-3AW","price":113.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-3AW-2.jpg?v=1734131121"},{"product_id":"dual-lite-ufo-4w","title":"Dual-Lite UFO-4W 32W-40W (2' - 4') T8, T10, or T12 Fluorescent Emergency Battery Pack, 500-600 Lumens","description":"\u003cp\u003e\u003cstrong\u003eApplication  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-4W emergency battery pack works in conjunction with a  fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. The UFO-4W can  be used with one 32W through 40W (2’ - 4’) T8, T10, or T12 fluorescent  lamp without integral starters, including U-shaped, HO, VHO and  circline. It is also compatible with most 1, 2, 3, and 4-lamp electronic,  standard magnetic, energy saving, and dimming AC ballasts. If used in  an emergency-only fixture, no AC ballast is necessary. For information  about specific lamps and ballast compatibility, please contact  the factory. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a solid-state  charger with automatic transfer circuit, test switch, LED charge indicator  light, a dependable, high-frequency inverter and a high-temperature,  Nickel-Cadmium battery. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eModel UFO-4W emergency battery pack does not affect normal fixture  operation and may be used with either a switched or unswitched fixture.  If a switched fixture is used, an unswitched hot lead must be connected  to the emergency battery pack. The emergency battery pack must be  fed from the same branch circuit as the AC ballast. The UFO-4W may  be installed inside, on top of, or remote from the fixture. The emergency  ballast may be remotely installed up to half the distance from the lamp  the AC ballast manufacturer recommends, or up to 50 feet, whichever is  less. UFO-4W emergency battery packs are not suitable for installation  in heated air outlet fixtures and wet or hazardous location fixtures.  Installation is not recommended with fixtures where the ambient  temperature may fall below 0°C (32°F). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-4W produces 500 - 600 lumens initial emergency light output.  During emergency illumination, one lamp is illuminated, even if installed  with a multi-lamp fluorescent fixture. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliances  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eUL 924 D\u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eamp Location Listed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA 101 (Life Safety Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA 70 ( National Electrical Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5 Years Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441794507059,"sku":"Dual-Lite-UFO-4W","price":120.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-4W-2.jpg?v=1734131137"},{"product_id":"dual-lite-ufo-5aw","title":"Dual-Lite UFO-5AW One or Two 17W-215W (2' - 8') T8, T10 or T12 Fluorescent Emergency Battery Pack, 600-700 Lumens","description":"\u003cp\u003e\u003cstrong\u003eApplication  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-5AW emergency battery pack works in conjunction with  a fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. The UFO-5AW can  operate one or two 17W to 215W (2’ - 8’) T8, T10 or T12 fluorescent  lamps without integral starters, including U-shaped, HO, VHO and  circline. It is compatible with most 1, 2, 3, and 4-lamp electronic,  standard magnetic, energy saving, and dimming AC ballasts. If used in  an emergency-only fixture, no AC ballast is necessary. For information  about specific lamps and ballast compatibility, please contact the  factory. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a solid-state  charger with automatic transfer circuit, test switch, LED charge indicator  light, a dependable, high-frequency inverter and a high-temperature,  Nickel-Cadmium battery.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eModel UFO-5AW emergency battery pack does not affect normal fixture  operation and may be used with either a switched or unswitched fixture.  If a switched fixture is used, an unswitched hot lead must be connected  to the emergency battery pack. The emergency battery pack must be  fed from the same branch circuit as the AC ballast. The UFO-5AW may  be installed inside, on top of, or remote from the fixture. The emergency  battery pack may be remotely installed up to half the distance from  the lamp the AC ballast manufacturer recommends, or up to 50 feet,  whichever is less. UFO-5AW emergency battery packs are not suitable  for installation in heated air outlet fixtures and wet or hazardous  location fixtures. Installation is not recommended with fixtures where  the ambient temperature may fall below 0°C (32°F).  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-5AW produces 600 - 700 lumens initial emergency light  output. During emergency illumination, one or two lamps are  illuminated. If two-lamp operation is selected, light output is evenly  divided between the lamps for better distribution of  emergency illumination.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliances  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eUL 924 Damp Location Listed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eN\u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eFPA 101 (Life Safety Code)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA 70 (National Electrical Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5 Year Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441797816627,"sku":"Dual-Lite-UFO-5AW","price":172.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-5AW-2.jpg?v=1734131152"},{"product_id":"dual-lite-ufo-5w","title":"Dual-Lite UFO-5W 32W-215W (4' - 8') T8 or T12 Fluorescent Emergency Battery Pack, 600-700 Lumens","description":"\u003cp\u003e\u003cstrong\u003eApplication  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-5W emergency battery pack works in conjunction with a  fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. The UFO-5W can  operate one 32W through 215W (4’ - 8’) T8 or T12 fluorescent lamp  without integral starter including U-shaped, HO, VHO and circline  at reduced illumination in the emergency mode for a minimum of 90  minutes. The UFO-5W can also operate one 32W T8 or one 34W to  40W T12 fluorescent lamp at reduced illumination in the emergency  mode for a minimum of 120 minutes. It is also compatible with most  1, 2, 3, and 4-lamp electronic, standard magnetic, energy saving, and  dimming AC ballasts. If used in an emergency-only fixture, no AC  ballast is necessary. For information about specific lamps and ballast  compatibility, please contact the factory.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a solid-state  charger with automatic transfer circuit, test switch, LED charge indicator  light, a dependable, high-frequency inverter and a high-temperature,  Nickel-Cadmium battery.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eModel UFO-5W emergency battery pack does not affect normal fixture  operation and may be used with either a switched or unswitched  fixture. If a switched fixture is used, an unswitched hot lead must be  connected to the emergency battery pack. The emergency battery  pack must be fed from the same branch circuit as the AC ballast. The  UFO-5W may be installed inside, on top of, or remote from the fixture.  The emergency battery pack may be remotely installed up to half the  distance from the lamp the AC ballast manufacturer recommends, or  up to 50 feet, whichever is less. UFO-5W emergency battery packs  are not suitable for installation in heated air outlet fixtures and wet  or hazardous location fixtures. Installation is not recommended with  fixtures where the ambient temperature may fall below 0°C (32°F).  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-5W produces 600 - 700 lumens initial emergency light  output. During emergency illumination, one lamp is illuminated, even if  installed with a multi-lamp fluorescent fixture.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliances  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUL 924 Damp Location Listed \u003c\/li\u003e\n  \u003cli\u003eNFPA 101 (Life Safety Code) \u003c\/li\u003e\n  \u003cli\u003eNFPA 70 (National Electrical Code) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFull 5 Year Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441797849395,"sku":"Dual-Lite-UFO-5W","price":148.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-5W-2.jpg?v=1734131168"},{"product_id":"dual-lite-ufo-6w","title":"Dual-Lite UFO-6W One or Two 17W-40W (2'-4') or One 40W-215W (5'-8') T8, T9, T10, or T12 Fluorescent Emergency Battery Pack, No Self-Diagnostics","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll UFO-6W emergency battery packs work in conjunction with a  fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. They can operate  one or two 17W-40W (2’-4’) or one 40W-215W (5’-8’) T8, T9, T10, or  T12 fluorescent lamps without integral starters, including U-shaped,  HO, VHO, and circline. All UFO-6W models are also compatible with  most 1, 2, 3, and 4-lamp electronic, standard magnetic, energy saving,  and dimming AC ballasts. If used in an emergency-only fixture, no AC  ballast is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a  solid-state charger with automatic transfer circuit, test switch, LED  charge indicator light, a dependable, high-frequency inverter and a  high-temperature, Nickel-Cadmium battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUFO-6W Series emergency battery packs do not affect normal fixture  operation and may be used with either switched or unswitched fixtures.  If a switched fixture is used, an unswitched hot lead must be connected  to the emergency ballast. The emergency battery packs must be  fed from the same branch circuit as the AC ballast. UFO-6W Series  models may be installed inside, on top of, or remote from the fixture.  The emergency battery pack may be remotely installed up to half the  distance from the lamp the AC ballast manufacturer recommends, or  up to 50 feet, whichever is less. UFO-6W Series emergency battery  packs are not suitable for installation in heated air outlet fixtures and  wet or hazardous location fixtures.Installation is not recommended  with fixtures where the ambient temperature may fall below 0°C (32°F).  Illumination  Initial emergency lighting output is 1100-1400 lumens on UFO-6W  and UFO-6WI models. During emergency illumination, one or two  lamps are illuminated. If two lamp operation is selected, light outputis  evenly divided between the lamps for better distribution of emergency  operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUL 924 Damp Location Listed  NFPA 101 (Life Safety Code)  NFPA 70 ( National Electrical Code)  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5 Year Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441801519411,"sku":"Dual-Lite-UFO-6W","price":178.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-6W-2.jpg?v=1734131183"},{"product_id":"dual-lite-ufo-6w-cld","title":"Dual-Lite UFO-6W-CLD One or Two 17W-40W (2'-4') or One 40W-215W (5'-8') T8, T9, T10, or T12 Fluorescent Emergency Battery Pack, No Self-Diagnostics, Extended Operating Temperature Range","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll UFO-6W emergency battery packs work in conjunction with a  fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. They can operate  one or two 17W-40W (2’-4’) or one 40W-215W (5’-8’) T8, T9, T10, or  T12 fluorescent lamps without integral starters, including U-shaped,  HO, VHO, and circline. All UFO-6W models are also compatible with  most 1, 2, 3, and 4-lamp electronic, standard magnetic, energy saving,  and dimming AC ballasts. If used in an emergency-only fixture, no AC  ballast is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a  solid-state charger with automatic transfer circuit, test switch, LED  charge indicator light, a dependable, high-frequency inverter and a  high-temperature, Nickel-Cadmium battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUFO-6W Series emergency battery packs do not affect normal fixture  operation and may be used with either switched or unswitched fixtures.  If a switched fixture is used, an unswitched hot lead must be connected  to the emergency ballast. The emergency battery packs must be  fed from the same branch circuit as the AC ballast. UFO-6W Series  models may be installed inside, on top of, or remote from the fixture.  The emergency battery pack may be remotely installed up to half the  distance from the lamp the AC ballast manufacturer recommends, or  up to 50 feet, whichever is less. UFO-6W Series emergency battery  packs are not suitable for installation in heated air outlet fixtures and  wet or hazardous location fixtures.Installation is not recommended  with fixtures where the ambient temperature may fall below 0°C (32°F).  Illumination  Initial emergency lighting output is 1100-1400 lumens on UFO-6W  and UFO-6WI models. During emergency illumination, one or two  lamps are illuminated. If two lamp operation is selected, light outputis  evenly divided between the lamps for better distribution of emergency  operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUL 924 Damp Location Listed  NFPA 101 (Life Safety Code)  NFPA 70 ( National Electrical Code)  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5 Year Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441801552179,"sku":"Dual-Lite-UFO-6W-CLD","price":627.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-6W-CLD-2.jpg?v=1734131198"},{"product_id":"dual-lite-ufo-6wi","title":"Dual-Lite UFO-6WI One or Two 17W-40W (2'-4') or One 40W-215W (5'-8') T8, T9, T10, or T12 Fluorescent Emergency Battery Pack, Spectron Self-Diagnostics","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll UFO-6W emergency battery packs work in conjunction with a  fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. They can operate  one or two 17W-40W (2’-4’) or one 40W-215W (5’-8’) T8, T9, T10, or  T12 fluorescent lamps without integral starters, including U-shaped,  HO, VHO, and circline. All UFO-6W models are also compatible with  most 1, 2, 3, and 4-lamp electronic, standard magnetic, energy saving,  and dimming AC ballasts. If used in an emergency-only fixture, no AC  ballast is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a  solid-state charger with automatic transfer circuit, test switch, LED  charge indicator light, a dependable, high-frequency inverter and a  high-temperature, Nickel-Cadmium battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUFO-6W Series emergency battery packs do not affect normal fixture  operation and may be used with either switched or unswitched fixtures.  If a switched fixture is used, an unswitched hot lead must be connected  to the emergency ballast. The emergency battery packs must be  fed from the same branch circuit as the AC ballast. UFO-6W Series  models may be installed inside, on top of, or remote from the fixture.  The emergency battery pack may be remotely installed up to half the  distance from the lamp the AC ballast manufacturer recommends, or  up to 50 feet, whichever is less. UFO-6W Series emergency battery  packs are not suitable for installation in heated air outlet fixtures and  wet or hazardous location fixtures.Installation is not recommended  with fixtures where the ambient temperature may fall below 0°C (32°F).  Illumination  Initial emergency lighting output is 1100-1400 lumens on UFO-6W  and UFO-6WI models. During emergency illumination, one or two  lamps are illuminated. If two lamp operation is selected, light outputis  evenly divided between the lamps for better distribution of emergency  operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUL 924 Damp Location Listed  NFPA 101 (Life Safety Code)  NFPA 70 ( National Electrical Code)  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5 Year Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441802109235,"sku":"Dual-Lite-UFO-6WI","price":441.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-6WI-2.jpg?v=1734131214"},{"product_id":"dual-lite-ufo-7w","title":"Dual-Lite UFO-7W One or Two 17W-40W (2'-4') or one 40W-215W (5'-8') T5, T8, T9, T10, or T12 Fluorescent Emergency Battery Pack, No Self-Diagnostics","description":"\u003cp\u003e\u003cb\u003eApplication  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-7W emergency battery packs work in conjunction with a  fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. They can operate  one or two 17W-40W (2’-4’) or one 40W-215W (5’-8’) T5, T8, T9, T10, or  T12 fluorescent lamps without integral starters, including U-shaped, HO,  VHO, circline and energy saving. They will also operate most 4-pin twin  and quad twin tube compact floruescent lamps. All UFO-7W models are  compatible with most 1, 2, 3, and 4-lamp electronic, standard magnetic,  energy saving, and dimming AC ballasts. If used in an emergency-only  fixture, no AC ballast is necessary. For information about specific lamps  and ballast compatibility, please contact the factory.  \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eConstruction  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a solid-state  charger with automatic transfer circuit, test switch, LED charge indicator  light, a dependable, high-frequency inverter and a high-temperature,  Nickel-Cadmium battery.  \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUFO-7W Series emergency battery packs do not affect normal fixture  operation and may be used with either switched or unswitched fixtures.  If a switched fixture is used, an unswitched hot lead must be connected  to the emergency ballast. The emergency battery pack must be fed from  the same branch circuit as the AC ballast. UFO-7W Series models may  be installed on top of, or remote from the fixture. The emergency battery  pack may be remotely installed up to half the distance from the lamp  the AC ballast manufacturer recommends, or up to 50 feet, whichever  is less. UFO-7W Series emergency battery packs are not suitable for  installation in heated air outlet fixtures and wet or hazardous location  fixtures. Installation is not recommended with fixtures where the ambient  temperature may fall below 0°C (32°F).  Illumination  Initial emergency lighting output is 1450-3500 lumens on UFO-7W and  UFO-7WI models. Emergency lumen output will be less with a compact  fluorescent lamp. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompliances  \u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eUL 924\u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003e Damp Location Listed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA101 (Life Safety Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA 70 (National Electrical Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWarranty  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e5 Year Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441802699059,"sku":"Dual-Lite-UFO-7W","price":438.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-7W-2.jpg?v=1734131230"},{"product_id":"dual-lite-ufo-7wi","title":"Dual-Lite UFO-7WI One or Two 17W-40W (2'-4') or one 40W-215W (5'-8') T5, T8, T9, T10, or T12 Fluorescent Emergency Battery Pack, Spectron Self-Diagnostics","description":"\u003cp\u003e\u003cb\u003eApplication  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe UFO-7W emergency battery packs work in conjunction with a  fluorescent fixture’s normal AC ballast to convert new or existing  fluorescent fixtures for emergency lighting operation, eliminating the  need to install additional emergency lighting units. They can operate  one or two 17W-40W (2’-4’) or one 40W-215W (5’-8’) T5, T8, T9, T10, or  T12 fluorescent lamps without integral starters, including U-shaped, HO,  VHO, circline and energy saving. They will also operate most 4-pin twin  and quad twin tube compact floruescent lamps. All UFO-7W models are  compatible with most 1, 2, 3, and 4-lamp electronic, standard magnetic,  energy saving, and dimming AC ballasts. If used in an emergency-only  fixture, no AC ballast is necessary. For information about specific lamps  and ballast compatibility, please contact the factory.  \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eConstruction  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAll unit housings consist of a compact case constructed of 22 gauge  sheet metal finished in black enamel. The unit contains a solid-state  charger with automatic transfer circuit, test switch, LED charge indicator  light, a dependable, high-frequency inverter and a high-temperature,  Nickel-Cadmium battery.  \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUFO-7W Series emergency battery packs do not affect normal fixture  operation and may be used with either switched or unswitched fixtures.  If a switched fixture is used, an unswitched hot lead must be connected  to the emergency ballast. The emergency battery pack must be fed from  the same branch circuit as the AC ballast. UFO-7W Series models may  be installed on top of, or remote from the fixture. The emergency battery  pack may be remotely installed up to half the distance from the lamp  the AC ballast manufacturer recommends, or up to 50 feet, whichever  is less. UFO-7W Series emergency battery packs are not suitable for  installation in heated air outlet fixtures and wet or hazardous location  fixtures. Installation is not recommended with fixtures where the ambient  temperature may fall below 0°C (32°F).  Illumination  Initial emergency lighting output is 1450-3500 lumens on UFO-7W and  UFO-7WI models. Emergency lumen output will be less with a compact  fluorescent lamp. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompliances  \u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eUL 924\u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003e Damp Location Listed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA101 (Life Safety Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA 70 (National Electrical Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWarranty  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e5 Year Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441802993971,"sku":"Dual-Lite-UFO-7WI","price":543.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-7WI-2.jpg?v=1734131246"},{"product_id":"dual-lite-ufo-cf2","title":"Dual-Lite UFO-CF2 One 13W-42W Twin, Quad or Triple Tube Lamp, One 22W-40W T5 Circline or One 18W-39W Long Compact Fluorescent Lamp Emergency Battery Pack, 700-1250 Lumens","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-CF series emergency battery packs work in tandem with an AC ballast to convert one 4-pin compact fluorescent lamp for emergency lighting operation including low mercury and amalgam content lamps, eliminating the need to install additional emergency lighting units. The UFO-CF1 can be used with one 18W-42W (4-pin) twin, quad or triple tube compact fluorescent lamp. The UFO-CF2 and UFO-CF2-CLD can operate one 13W-42W twin, quad or triple tube lamp, one 22W-40W T5 circline or one 18W-39W long compact fluorescent lamp. The UFO-CF emergency battery is compatible with most single and multi lamp electronic, magnetic, standard, energysaving and dimming AC ballasts. UFO-CF2-CLD has an extended operating temperature range for cold environment applications For information about specific lamp and ballast compatibility, please call the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  All unit housings consist of a compact case constructed of 22-gauge sheet metal, finished in black enamel, with 2’ of flexible conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  During emergency illumination, one lamp is illuminated, even if installed with a multi-lamp fluorescent fixture. Initial emergency output is up to 860 lumens with the UFO-CF1. Initial emergency output is up to 1250 lumens with the UFO-CF2 and UFO-CF2-CLD.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-CF compact fluorescent emergency battery pack does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched AC power supply must also be connected to the UFO-CF compact fluorescent battery pack, and must be fed from the same branch circuit as the fixture’s AC ballast. The UFO-CF may be installed on or remote from the fixture. For remote installation, the UFO-CF may be installed up to one-half the distance the AC ballast manufacturer recommends for remote location from the fixture, or up to 6 feet, whichever is less. Install the test switch for visual confirmation of the charge indicator LED and simplified testing. The test switch may be installed in the ceiling near the fixture.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL924 Damp Location Listed\u003cbr\u003e\n  NFPA 101 (Life Safety Code)\u003cbr\u003e\n  NFPA 70 (National Electrical Code)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  5 Years Full Warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/UFO-CF-ordering-information_5429d29c-b9d9-46d5-915c-2ca97e999f20.jpg?v=1761765952\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441804730675,"sku":"Dual-Lite-UFO-CF2","price":188.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-CF2-2.jpg?v=1734131281"},{"product_id":"dual-lite-ufo-cf2-cld","title":"Dual-Lite UFO-CF2-CLD One 13W-42W Twin, Quad or Triple Tube Lamp, One 22W-40W T5 Circline or One 18W-39W Long Compact Fluorescent Lamp Emergency Battery Pack, 700-1250 Lumens, Extended\nOperating Temperature Range","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-CF series emergency battery packs work in tandem with an AC ballast to convert one 4-pin compact fluorescent lamp for emergency lighting operation including low mercury and amalgam content lamps, eliminating the need to install additional emergency lighting units. The UFO-CF1 can be used with one 18W-42W (4-pin) twin, quad or triple tube compact fluorescent lamp. The UFO-CF2 and UFO-CF2-CLD can operate one 13W-42W twin, quad or triple tube lamp, one 22W-40W T5 circline or one 18W-39W long compact fluorescent lamp. The UFO-CF emergency battery is compatible with most single and multi lamp electronic, magnetic, standard, energysaving and dimming AC ballasts. UFO-CF2-CLD has an extended operating temperature range for cold environment applications For information about specific lamp and ballast compatibility, please call the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  All unit housings consist of a compact case constructed of 22-gauge sheet metal, finished in black enamel, with 2’ of flexible conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  During emergency illumination, one lamp is illuminated, even if installed with a multi-lamp fluorescent fixture. Initial emergency output is up to 860 lumens with the UFO-CF1. Initial emergency output is up to 1250 lumens with the UFO-CF2 and UFO-CF2-CLD.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-CF compact fluorescent emergency battery pack does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched AC power supply must also be connected to the UFO-CF compact fluorescent battery pack, and must be fed from the same branch circuit as the fixture’s AC ballast. The UFO-CF may be installed on or remote from the fixture. For remote installation, the UFO-CF may be installed up to one-half the distance the AC ballast manufacturer recommends for remote location from the fixture, or up to 6 feet, whichever is less. Install the test switch for visual confirmation of the charge indicator LED and simplified testing. The test switch may be installed in the ceiling near the fixture.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL924 Damp Location Listed\u003cbr\u003e\n  NFPA 101 (Life Safety Code)\u003cbr\u003e\n  NFPA 70 (National Electrical Code)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  5 Years Full Warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/UFO-CF-ordering-information_5429d29c-b9d9-46d5-915c-2ca97e999f20.jpg?v=1761765952\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441805058355,"sku":"Dual-Lite-UFO-CF2-CLD","price":300.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-CF2-CLD-2.jpg?v=1734131296"},{"product_id":"dual-lite-ufo-led25","title":"Dual-Lite UFO-LED25 Emergency Lighting LED Power Pack, 25VA\/W, 120-277V","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The UFO LED series battery pack inverter unit is designed to work in \n  tandem with an AC ballast to power an LED luminaire in the event of interruptions or failures, eliminating the need to install additional \n  emergency lighting units. The UFO-LED will operate the LED luminaire at full lumen output continuously for 90 minutes during an input power \n  interruption. It can be used with normally-on, normally-off, \n  or switched luminaires.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-LED enclosure and cover are constructed of heavy 22 gauge \n  steel with a white paint finish. The unit contains a solid state charger with automatic transfer circuit, LED charge indicator light, and a high \n  temperature Nickel-Cadmium battery.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-LED does not affect normal fixture operation and may be \n  used with a switched or unswitched fixture. If a switched fixture is used an unswitched AC power supply must also be connected to the UFOLED, \n  and must be fed from the same branch circuit as the fixture’s AC ballast. For remote installation, the UFO-LED may be installed up to \n  250 feet from the fixture.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  UFO-LED provides full lumen output during emergency illumination for a minimum of 90 minutes.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL 924 Damp Location Listed\u003cbr\u003e\n  NFPA 101 (Life Safety Code)\u003cbr\u003e\n  NFPA 70 (National Electrical Code)\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  5 Years Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441805484339,"sku":"Dual-Lite-UFO-LED25","price":691.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-LED25-2.jpg?v=1734131312"},{"product_id":"dual-lite-ufo-lp1","title":"Dual-Lite UFO-LP1 One 21-28W Standard or 24-54W High Output T5; One 32W (4'), 40W (5') or 44W H0 (4') T8 Low Profile Emergency Lighting Fluorescent Lamp; or One 36-55W (4-pin) Long Compact Fluorescent Battery Pack, 120-277V, 390-700 Lumens","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-LP Series low-profile fluorescent emergency battery packs work in conjunction with a low-profile or standard-size electronic AC ballast to convert new or existing fluorescent fixtures into unobtrusive emergency lighting, eliminating the need to install additional emergency lighting units. Model UFO-LP1 can be used with one 21 - 28W standard or 24 - 54W high output T5; one 32W (4’), 40W (5’) or 44W H0 (4’) T8 fluorescent lamp; or one 36 - 55W (4-pin) long compact fluorescent lamp. Model UFO-LP2 can be used with one 14 - 54W (2’ - 4’) standard or high output T5; 17 -55W (2’ - 5’) standard or high output T8 or 36 - 55W (4-pin) long compact fluorescent lamp. UFO-LP Series models are also compatible with most 1, 2, 3 and 4-lamp electronic (including those containing end-of-lamp-life shutdown circuits), standard, energy saving, and dimming AC ballasts. For information about specific lamp and ballast compatibility, please call the factory.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  All unit housings consist of a compact case constructed of 22 gauge sheet metal finished in black enamel. The unit contains a solid-state charger with automatic transfer circuit, test switch, LED charge indicator light, a dependable, high-frequency inverter and a high-temperature, nickel-cadmium battery.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  UFO-LP series models do not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency ballast. The emergency battery pack must be fed from the same branch circuit as the AC ballast. UFO-LP series models are for installation inside the fixture ballast channel. UFO-LP Series emergency battery packs are not suitable for installation in heated air outlet fixtures and wet or hazardous location fixtures. Installation is not recommended with fixtures where the ambient temperature may fall below 0°C (32°F).\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  Initial emergency lighting output is 390 -700 lumens on UFO-LP1. Initial emergency lighting output is 600 - 1325 lumens on UFO-LP2. During emergency operation, one lamp is illuminated, even if installed with a multi-lamp AC ballast.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL 924 Damp Location Listed\u003cbr\u003e\n  NFPA 101 (Life Safety Code)\u003cbr\u003e\n  NFPA 70 (National Electric Code)\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  5 Year Full Warranty\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/UFO-LP-ordering-information_bacc24cf-a22a-49d2-a761-d3f8b60f6ec4.jpg?v=1761765965\"\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441805713715,"sku":"Dual-Lite-UFO-LP1","price":186.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-LP1-2.jpg?v=1734131327"},{"product_id":"dual-lite-ufo-lp2","title":"Dual-Lite UFO-LP2 One 14-54W (2'-4') Standard or High Output T5; 17 -55W (2'- 5') Standard or High Output T8 or 36-55W (4-pin) Long Compact Fluorescent Low Profile Emergency Light Battery Pack, 120-277V, 600-1325 Lumens","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-LP Series low-profile fluorescent emergency battery packs work in conjunction with a low-profile or standard-size electronic AC ballast to convert new or existing fluorescent fixtures into unobtrusive emergency lighting, eliminating the need to install additional emergency lighting units. Model UFO-LP1 can be used with one 21 - 28W standard or 24 - 54W high output T5; one 32W (4’), 40W (5’) or 44W H0 (4’) T8 fluorescent lamp; or one 36 - 55W (4-pin) long compact fluorescent lamp. Model UFO-LP2 can be used with one 14 - 54W (2’ - 4’) standard or high output T5; 17 -55W (2’ - 5’) standard or high output T8 or 36 - 55W (4-pin) long compact fluorescent lamp. UFO-LP Series models are also compatible with most 1, 2, 3 and 4-lamp electronic (including those containing end-of-lamp-life shutdown circuits), standard, energy saving, and dimming AC ballasts. For information about specific lamp and ballast compatibility, please call the factory.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  All unit housings consist of a compact case constructed of 22 gauge sheet metal finished in black enamel. The unit contains a solid-state charger with automatic transfer circuit, test switch, LED charge indicator light, a dependable, high-frequency inverter and a high-temperature, nickel-cadmium battery.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  UFO-LP series models do not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency ballast. The emergency battery pack must be fed from the same branch circuit as the AC ballast. UFO-LP series models are for installation inside the fixture ballast channel. UFO-LP Series emergency battery packs are not suitable for installation in heated air outlet fixtures and wet or hazardous location fixtures. Installation is not recommended with fixtures where the ambient temperature may fall below 0°C (32°F).\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  Initial emergency lighting output is 390 -700 lumens on UFO-LP1. Initial emergency lighting output is 600 - 1325 lumens on UFO-LP2. During emergency operation, one lamp is illuminated, even if installed with a multi-lamp AC ballast.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL 924 Damp Location Listed\u003cbr\u003e\n  NFPA 101 (Life Safety Code)\u003cbr\u003e\n  NFPA 70 (National Electric Code)\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  5 Year Full Warranty\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/UFO-LP-ordering-information_bacc24cf-a22a-49d2-a761-d3f8b60f6ec4.jpg?v=1761765965\"\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441805844787,"sku":"Dual-Lite-UFO-LP2","price":225.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-LP2-2.jpg?v=1734131344"},{"product_id":"dual-lite-ufo-rp2","title":"Dual-Lite UFO-RP2 3.7W Reduced Profile Fluorescent Lamp Emergency Battery Pack, 700 Lumens","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-RP series emergency battery pack has a reduced profile design that allows it to be installed in ballast channels and enclosures that have an internal height down to 1.15 inches. This series works in tandem with an AC ballast to power one or two 2’ – 4’ single or Bi-pin T8, T12, HO or VHO fluorescent lamps for emergency operation,\u003cbr\u003e\n  eliminating the need to install additional emergency lighting units. The UFO-RP2 and UFO-RP3 can also power one or two, 2’-4’ single or Bi-pin T5 and T8 lamps. The UFO-RP series battery packs can act as multiple distributed sources of emergency lighting allowing for greater redundancy.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  All unit housings consist of a compact case constructed of galvanized steel. The unit contains a solid-state charger with automatic transfer circuit, test switch, LED charge indicator light, a dependable high frequency inverter and a high temperature, Nickel-Cadmium battery.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The UFO-RP fluorescent emergency battery pack does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched AC power supply must also be connected to the UFO-RP, and must be fed from the same branch circuit as the fixture’s AC ballast. The\u003cbr\u003e\n  UFO-RP may be installed on or remote from the fixture. For remote installation, the UFO-RP may be installed up to one-half the distance the AC ballast manufacturer recommends for remote location from the fixture, or up to 10 feet, whichever is less. The remote battery pack must be installed in its own enclosure or in a location that\u003cbr\u003e\n  allows the wiring to be fully enclosed. Install the integral test switch for visual confirmation of the charge indicator LED and simplified testing.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  Initial emergency output is up to 500 lumens on UFO-RP1. Initial emergency output is up to 700 Lumens on UFO-RP2. Initial emergency output is up to 1400 lumens on UFO-RP3. During emergency illumination, one lamp is illuminated, even if installed with a multi-lamp fluorescent fixture.\u003c\/p\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eUL924 Damp Location \u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eListed\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eUL and CUL Listed UFO-RP1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA 101 (Life Safety Code)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eNFPA 70 (National Electrica\u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003el Code)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  5 Years Full Warranty\u003c\/p\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441809187123,"sku":"Dual-Lite-UFO-RP2","price":112.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-UFO-RP2-2.jpg?v=1734131376"}],"url":"https:\/\/electricbargainstores.com\/collections\/dual-lite-battery-packs.oembed","provider":"Electric Bargain Store","version":"1.0","type":"link"}