{"title":"EVO6","description":"","products":[{"product_id":"gotham-evo6-106471","title":"Gotham EVO6 40\/15 AR WD LD MVOLT GZ10 EL 6\" LED Recessed Lighting, 4000K, 1500 Lumens, 0-10V driver dims to 10%","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003euminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260770423091,"sku":"Gotham-EVO6-106471","price":423.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-106471-2.jpg?v=1734329213"},{"product_id":"gotham-evo6-110375","title":"Gotham EVO6 35\/10 AR LSS WD MVOLT GZ10 TRW 6\" LED Recessed Lighting, 3500K, 1000 Lumens, Clear Reflector and Flange, Semi-Specular Finish, Wide Distribution, 120-277V, Dims to 10%, White Painted Flange","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260771406131,"sku":"Gotham-EVO6-110375","price":258.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110375-2.jpg?v=1734329227"},{"product_id":"gotham-evo6-110474","title":"Gotham EVO6 27\/10 MD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 2700K, 1000 Lumens, Medium Distribution, 120-277V, 0-10V Driver Dims to 10%, Clear Reflector and Flange, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260772356403,"sku":"Gotham-EVO6-110474","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110474-2.jpg?v=1734329242"},{"product_id":"gotham-evo6-110475","title":"Gotham EVO6 30\/10 MD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 3000K, 1000 Lumens, Medium Distribution, 120-277V, 0-10V Driver Dims to 10%, Clear Reflector and Flange, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260773830963,"sku":"Gotham-EVO6-110475","price":262.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110475-2.jpg?v=1734329255"},{"product_id":"gotham-evo6-110476","title":"Gotham EVO6 35\/10 MD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 3500K, 1000 Lumens, Medium Distribution, 120-277V, 0-10V Driver Dims to 10%, Clear Reflector and Flange, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260775272755,"sku":"Gotham-EVO6-110476","price":262.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110476-2.jpg?v=1734329269"},{"product_id":"gotham-evo6-110477","title":"Gotham EVO6 40\/10 MD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 4000K, 1000 Lumens, Medium Distribution, 120-277V, 0-10V Driver Dims to 10%, Clear Reflector and Flange, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260776485171,"sku":"Gotham-EVO6-110477","price":266.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110477-2.jpg?v=1734329284"},{"product_id":"gotham-evo6-110478","title":"Gotham EVO6 27\/15 MD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 2700K, 1000 Lumens, Medium Distribution, 120-277V, 0-10V Driver Dims to 10%, Clear Reflector and Flange, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260777632051,"sku":"Gotham-EVO6-110478","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110478-2.jpg?v=1734329298"},{"product_id":"gotham-evo6-110479","title":"Gotham EVO6 30\/15 MD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 3000K, 1000 Lumens, Medium Distribution, 120-277V, 0-10V Driver Dims to 10%, Clear Reflector and Flange, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260779041075,"sku":"Gotham-EVO6-110479","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110479-2.jpg?v=1734329313"},{"product_id":"gotham-evo6-110480","title":"Gotham EVO6 35\/15 MD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 3500K, 1000 Lumens, Medium Distribution, 120-277V, 0-10V Driver Dims to 10%, Clear Reflector and Flange, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260780155187,"sku":"Gotham-EVO6-110480","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110480-2.jpg?v=1734329327"},{"product_id":"gotham-evo6-110481","title":"Gotham EVO6 40\/15 MD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 4000K, 1000 Lumens, Medium Distribution, 120-277V, 0-10V Driver Dims to 10%, Clear Reflector and Flange, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260781269299,"sku":"Gotham-EVO6-110481","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110481-2.jpg?v=1734329342"},{"product_id":"gotham-evo6-110700","title":"Gotham EVO6 27\/15 MWD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 2700K, 1500 Lumens, Clear Reflector and Flange, Medium Wide Distribution, 120-277V, 0-10V Driver Dims to 10%, Self-Flanged Trim, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260782383411,"sku":"Gotham-EVO6-110700","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110700-2.jpg?v=1734329357"},{"product_id":"gotham-evo6-110701","title":"Gotham EVO6 30\/15 MWD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 3000K, 1500 Lumens, Clear Reflector and Flange, Medium Wide Distribution, 120-277V, 0-10V Driver Dims to 10%, Self-Flanged Trim, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260783431987,"sku":"Gotham-EVO6-110701","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110701-2.jpg?v=1734329371"},{"product_id":"gotham-evo6-110702","title":"Gotham EVO6 35\/15 MWD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 3500K, 1500 Lumens, Clear Reflector and Flange, Medium Wide Distribution, 120-277V, 0-10V Driver Dims to 10%, Self-Flanged Trim, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260784611635,"sku":"Gotham-EVO6-110702","price":253.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110702-2.jpg?v=1734329386"},{"product_id":"gotham-evo6-110703","title":"Gotham EVO6 40\/15 MWD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 4000K, 1500 Lumens, Clear Reflector and Flange, Medium Wide Distribution, 120-277V, 0-10V Driver Dims to 10%, Self-Flanged Trim, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260785660211,"sku":"Gotham-EVO6-110703","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110703-2.jpg?v=1734329400"},{"product_id":"gotham-evo6-110704","title":"Gotham EVO6 50\/15 MWD MVOLT GZ10 AR LSS 6\" LED Recessed Lighting, 5000K, 1500 Lumens, Clear Reflector and Flange, Medium Wide Distribution, 120-277V, 0-10V Driver Dims to 10%, Self-Flanged Trim, Semi-Specular Finish","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eOptical Assembly\u003c\/span\u003e\u003c\/b\u003e\u003cdiv\u003eOptical design is a Bounding Ray design with 45° cutoff to source and source image. Top-down flash characteristic for superior glare control.\u003cbr\u003e\u003cspan style=\"background-color: initial;\"\u003eUnitized optics shall have mechanical attachment of the light engine to the lower reflector for complete optical alignment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eElectrical\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. The fluctuations of line voltage shall have no \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003evisible effect on the luminous output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eSound Rated A+. Driver shall be \u0026gt;80% efficient at full load across all input voltages.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eInput wires shall be 18AWG, 300V minimum, solid copper.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire shall be equipped with interface for nLight wired or wireless network with integral power supply as per specification.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eDimming\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI\/IES RP-16-10) over a range \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eof 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eeldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewhich demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eDriver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eConstruction\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFully serviceable and upgradeable lensed LED light engine, both the driver and light engine are suitable for field maintenance and are serviceable from above \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eor below the ceiling.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaire housing shall be constructed of 16-gauge galvanized steel and have preinstalled telescopic mounting bars with maximum 32\" and minimum 15\" \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eextension and 4\" vertical adjustment.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLuminaires shall be suitable for installation in ceilings up to 1½\" thick. (specify ceiling thickness adapter to extend frame to accommodate ceiling thickness up \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eto 5\").\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eTool-less adjustments shall be possible after installation.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThe assembly and manufacturing process for the luminaire shall be designed to assure all internal components are adequately supported to withstand mechanical \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eshock and vibration.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e25°C ambient temperature standard (1\/2\" clearance on all sides from non-combustible materials in non-IC applications, unless marked spacing noted otherwise).\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFor use in insulated ceilings, a 3\" clearance on all sides from insulation is required (unless marked spacing noted otherwise). 40°C high ambient \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eoptional.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eListings\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eFixtures are CSA certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ethe \"Standards for Safety\" to UL, wet location covered ceiling. Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewith the results reviewed by an independent, accredited certification organization. Visit \u003c\/span\u003e\u003ca href=\"http:\/\/www.energystar.gov\" style=\"background-color: initial;\"\u003e www.energystar.gov \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for specific configurations listed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eBUY AMERICAN ACT\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eThis product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003erefer to \u003c\/span\u003e\u003ca href=\"http:\/\/www.acuitybrands.com\/buy-american\" style=\"background-color: initial;\"\u003e www.acuitybrands.com\/buy-american \u003c\/a\u003e\u003cspan style=\"background-color: initial;\"\u003e for additional information.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003ePhotometrics\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eLEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eminimum operational life of 60,000 hours.\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eColor appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ewithin a tolerance of \u0026lt;2.5 MacAdam ellipse as defined by a point at the intersection of the CCT line and the black body locus line in CIE chromaticity space.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e5-year limited warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/gotham-EVO6-ordering-information_f8cc0d67-1a05-48bb-8d93-4b30023aa10d.jpg?v=1761790474\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50260786479411,"sku":"Gotham-EVO6-110704","price":254.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Gotham-EVO6-110704-2.jpg?v=1734329415"}],"url":"https:\/\/electricbargainstores.com\/collections\/evo6.oembed","provider":"Electric Bargain Store","version":"1.0","type":"link"}