{"title":"Indoor Emergency Lighting","description":"","products":[{"product_id":"dual-lite-12xpb75k","title":"Dual-Lite 12XPB75K 75W Hazardouz Location Emergency System, No Time Delay Relay","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The 12XPB Series is a self-contained hazardous location emergency lighting system which is designed for environments known to have high concentrations of gas, explosive vapors and dust. The 12XPB is intended for use in oil and gas refining, chemical production and storage, grain processing and paint manufacture. The 12XPB provides emergency illumination for a minimum of 90 minutes in the event of power outage. Power is only supplied to the external lamps when AC power is lost.\u003cbr\u003e\n  The 12XPB can be applied in the following enviroments:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass I, Div. 1 \u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003e\u0026amp; 2, Groups C, D\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass I, Zones 1 \u0026amp; 2, Groups IIB, IIA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass II, Div. 1 \u0026amp; 2, Groups E, F, G\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass III, Div. 1 \u0026amp; 2\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The XPB Series housing is made of copper-free(less than 0.4%) aluminum with a baked on electro-statically applied epoxy for maximum corrosion resistance. The housing contains lead acid batteries which deliver 75 watts to power external 12VDC, 18 or 28 watt incandescent lamps for 90 minutes in the event of power outage.\u003cbr\u003e\n  The enclosure, lamp-heads and test station utilize ¾” connection. There are 7 each -3\/4” threaded holes in the enclosure.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Provided with 2 mounting holes at each corner for attachment to a wall or other suitable surface. The housing contains 7 each ¾” drilled and tapped holes for threaded conduit. Quick access to internal wiring and circuitry through a threaded cover with supplied gasket. The 12XPB assembly includes a remote test station(push-to-test and AC indicator) along with seal fitting, ¾” pipe nipple and sealing compound. The lighting fixtures(ordered separately) can be pendant, wall or ceiling mount.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eElectronics\u003c\/strong\u003e\u003cbr\u003e\n  Voltage input through a heavy duty transformer at 120 or 277VAC operation. Fully automatic solid-state charger which includes low voltage disconnect to prevent deep discharge of the battery. Includes six maintenance-free lead acid batteries to provide 12VDC output to power up to 75 watts of load for 90 minutes. An AC-on indicator and\u003cbr\u003e\n  push-to-test station(sold separately) provides momentary testing of the system.\u003c\/p\u003e\n\n\u003cb\u003e\u003cbr\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/12XPB-odering-information_2332e88b-a8ef-42fa-abf6-3f5b26638dd6.jpg?v=1761762482\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441573847347,"sku":"Dual-Lite-12XPB75K","price":4943.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-12XPB75K-2.jpg?v=1734122909"},{"product_id":"dual-lite-12xpb75k-tdr120","title":"Dual-Lite 12XPB75K-TDR120 75W Hazardouz Location Emergency System, with 120VAC Time Delay Relay","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The 12XPB Series is a self-contained hazardous location emergency lighting system which is designed for environments known to have high concentrations of gas, explosive vapors and dust. The 12XPB is intended for use in oil and gas refining, chemical production and storage, grain processing and paint manufacture. The 12XPB provides emergency illumination for a minimum of 90 minutes in the event of power outage. Power is only supplied to the external lamps when AC power is lost.\u003cbr\u003e\n  The 12XPB can be applied in the following enviroments:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass I, Div. 1 \u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003e\u0026amp; 2, Groups C, D\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass I, Zones 1 \u0026amp; 2, Groups IIB, IIA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass II, Div. 1 \u0026amp; 2, Groups E, F, G\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass III, Div. 1 \u0026amp; 2\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The XPB Series housing is made of copper-free(less than 0.4%) aluminum with a baked on electro-statically applied epoxy for maximum corrosion resistance. The housing contains lead acid batteries which deliver 75 watts to power external 12VDC, 18 or 28 watt incandescent lamps for 90 minutes in the event of power outage.\u003cbr\u003e\n  The enclosure, lamp-heads and test station utilize ¾” connection. There are 7 each -3\/4” threaded holes in the enclosure.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Provided with 2 mounting holes at each corner for attachment to a wall or other suitable surface. The housing contains 7 each ¾” drilled and tapped holes for threaded conduit. Quick access to internal wiring and circuitry through a threaded cover with supplied gasket. The 12XPB assembly includes a remote test station(push-to-test and AC indicator) along with seal fitting, ¾” pipe nipple and sealing compound. The lighting fixtures(ordered separately) can be pendant, wall or ceiling mount.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eElectronics\u003c\/strong\u003e\u003cbr\u003e\n  Voltage input through a heavy duty transformer at 120 or 277VAC operation. Fully automatic solid-state charger which includes low voltage disconnect to prevent deep discharge of the battery. Includes six maintenance-free lead acid batteries to provide 12VDC output to power up to 75 watts of load for 90 minutes. An AC-on indicator and\u003cbr\u003e\n  push-to-test station(sold separately) provides momentary testing of the system.\u003c\/p\u003e\n\n\u003cb\u003e\u003cbr\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/12XPB-odering-information_2332e88b-a8ef-42fa-abf6-3f5b26638dd6.jpg?v=1761762482\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441573945651,"sku":"Dual-Lite-12XPB75K-TDR120","price":5261.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-12XPB75K-TDR120-2.jpg?v=1734122928"},{"product_id":"dual-lite-12xpb75k-tdr277","title":"Dual-Lite 12XPB75K-TDR277 75W Hazardouz Location Emergency System, with 277VAC Time Delay Relay","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The 12XPB Series is a self-contained hazardous location emergency lighting system which is designed for environments known to have high concentrations of gas, explosive vapors and dust. The 12XPB is intended for use in oil and gas refining, chemical production and storage, grain processing and paint manufacture. The 12XPB provides emergency illumination for a minimum of 90 minutes in the event of power outage. Power is only supplied to the external lamps when AC power is lost.\u003cbr\u003e\n  The 12XPB can be applied in the following enviroments:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass I, Div. 1 \u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003e\u0026amp; 2, Groups C, D\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass I, Zones 1 \u0026amp; 2, Groups IIB, IIA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass II, Div. 1 \u0026amp; 2, Groups E, F, G\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"letter-spacing: 0px; background-color: initial;\"\u003eClass III, Div. 1 \u0026amp; 2\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The XPB Series housing is made of copper-free(less than 0.4%) aluminum with a baked on electro-statically applied epoxy for maximum corrosion resistance. The housing contains lead acid batteries which deliver 75 watts to power external 12VDC, 18 or 28 watt incandescent lamps for 90 minutes in the event of power outage.\u003cbr\u003e\n  The enclosure, lamp-heads and test station utilize ¾” connection. There are 7 each -3\/4” threaded holes in the enclosure.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Provided with 2 mounting holes at each corner for attachment to a wall or other suitable surface. The housing contains 7 each ¾” drilled and tapped holes for threaded conduit. Quick access to internal wiring and circuitry through a threaded cover with supplied gasket. The 12XPB assembly includes a remote test station(push-to-test and AC indicator) along with seal fitting, ¾” pipe nipple and sealing compound. The lighting fixtures(ordered separately) can be pendant, wall or ceiling mount.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eElectronics\u003c\/strong\u003e\u003cbr\u003e\n  Voltage input through a heavy duty transformer at 120 or 277VAC operation. Fully automatic solid-state charger which includes low voltage disconnect to prevent deep discharge of the battery. Includes six maintenance-free lead acid batteries to provide 12VDC output to power up to 75 watts of load for 90 minutes. An AC-on indicator and\u003cbr\u003e\n  push-to-test station(sold separately) provides momentary testing of the system.\u003c\/p\u003e\n\n\u003cb\u003e\u003cbr\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/12XPB-odering-information_2332e88b-a8ef-42fa-abf6-3f5b26638dd6.jpg?v=1761762482\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441573978419,"sku":"Dual-Lite-12XPB75K-TDR277","price":6340.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-12XPB75K-TDR277-2.jpg?v=1734122946"},{"product_id":"dual-lite-clm50h25","title":"Dual-Lite CLM50H25 Mini-Concealed Recessed Emergency Luminaire Lead Calcium Battery, 25 Watt Halogen","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series is a concealed and recessed, self-contained emergency light with fully automatic operation suitable for wall or ceiling mount applications. With its 25 watt MR-11 halogen lamps it offers concealed and unobtrusive emergency lighting compliance for small and large open floor plans. The 4” rotating door is flush with trim and mounting surface. Upon loss of power, the door automatically opens to reveal the emergency lighting lamp-heads.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\nRecessed back-box made of galvanized 20 gauge steel. Trim and door panel in durable die-cast zinc with white powder coat finish. Can be wall-papered or field painted. Trim and panel door are mounted flush with surface with no exposed hardware.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\nWall or ceiling mount. The CLM is fully recessed by means of a steel back-box complete with fully adjustable mounting hardware. The modular assembly and quick connector design allow for fast and easy installation. Universal mounting rails extend to mounting studs in the wall, or rails for suspended ceiling.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series provides illumination with two adjustable high intensity 25 watt MR-11 Halogen lamps which provide up to 85’ of spacing coverage.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\nUL924 Listed\u003cbr\u003e\nNFPA101 Life Safety Code\u003cbr\u003e\nNFPA70 National Electric Code\u003cbr\u003e\nOSHA\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\nFull 3 year warranty\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/CLM-ordering-information_c62bf7bd-1b4a-466c-939e-ceeafbb6782f.jpg?v=1761762657\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441575944499,"sku":"Dual-Lite-CLM50H25","price":676.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-CLM50H25-2.jpg?v=1734123544"},{"product_id":"dual-lite-clm50h25-cp","title":"Dual-Lite CLM50H25-CP Mini-Concealed Recessed Emergency Luminaire Lead Calcium Battery, 25 Watt Halogen, Chicago Plenum Rated","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series is a concealed and recessed, self-contained emergency light with fully automatic operation suitable for wall or ceiling mount applications. With its 25 watt MR-11 halogen lamps it offers concealed and unobtrusive emergency lighting compliance for small and large open floor plans. The 4” rotating door is flush with trim and mounting surface. Upon loss of power, the door automatically opens to reveal the emergency lighting lamp-heads.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\nRecessed back-box made of galvanized 20 gauge steel. Trim and door panel in durable die-cast zinc with white powder coat finish. Can be wall-papered or field painted. Trim and panel door are mounted flush with surface with no exposed hardware.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\nWall or ceiling mount. The CLM is fully recessed by means of a steel back-box complete with fully adjustable mounting hardware. The modular assembly and quick connector design allow for fast and easy installation. Universal mounting rails extend to mounting studs in the wall, or rails for suspended ceiling.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series provides illumination with two adjustable high intensity 25 watt MR-11 Halogen lamps which provide up to 85’ of spacing coverage.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\nUL924 Listed\u003cbr\u003e\nNFPA101 Life Safety Code\u003cbr\u003e\nNFPA70 National Electric Code\u003cbr\u003e\nOSHA\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\nFull 3 year warranty\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/CLM-ordering-information_c62bf7bd-1b4a-466c-939e-ceeafbb6782f.jpg?v=1761762657\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441576665395,"sku":"Dual-Lite-CLM50H25-CP","price":1762.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-CLM50H25-CP-2.jpg?v=1734123562"},{"product_id":"dual-lite-clm50h25-xk","title":"Dual-Lite CLM50H25-XK Mini-Concealed Recessed Emergency Luminaire Lead Calcium Battery, 25 Watt Halogen, Less Rough-In Kit","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series is a concealed and recessed, self-contained emergency light with fully automatic operation suitable for wall or ceiling mount applications. With its 25 watt MR-11 halogen lamps it offers concealed and unobtrusive emergency lighting compliance for small and large open floor plans. The 4” rotating door is flush with trim and mounting surface. Upon loss of power, the door automatically opens to reveal the emergency lighting lamp-heads.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\nRecessed back-box made of galvanized 20 gauge steel. Trim and door panel in durable die-cast zinc with white powder coat finish. Can be wall-papered or field painted. Trim and panel door are mounted flush with surface with no exposed hardware.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\nWall or ceiling mount. The CLM is fully recessed by means of a steel back-box complete with fully adjustable mounting hardware. The modular assembly and quick connector design allow for fast and easy installation. Universal mounting rails extend to mounting studs in the wall, or rails for suspended ceiling.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series provides illumination with two adjustable high intensity 25 watt MR-11 Halogen lamps which provide up to 85’ of spacing coverage.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\nUL924 Listed\u003cbr\u003e\nNFPA101 Life Safety Code\u003cbr\u003e\nNFPA70 National Electric Code\u003cbr\u003e\nOSHA\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\nFull 3 year warranty\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/CLM-ordering-information_c62bf7bd-1b4a-466c-939e-ceeafbb6782f.jpg?v=1761762657\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441576862003,"sku":"Dual-Lite-CLM50H25-XK","price":1550.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-CLM50H25-XK-2.jpg?v=1734123595"},{"product_id":"dual-lite-clm50nh25","title":"Dual-Lite CLM50NH25 Mini-Concealed Recessed Emergency Luminaire Nickel Cadmium, 25 Watt Halogen","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series is a concealed and recessed, self-contained emergency light with fully automatic operation suitable for wall or ceiling mount applications. With its 25 watt MR-11 halogen lamps it offers concealed and unobtrusive emergency lighting compliance for small and large open floor plans. The 4” rotating door is flush with trim and mounting surface. Upon loss of power, the door automatically opens to reveal the emergency lighting lamp-heads.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\nRecessed back-box made of galvanized 20 gauge steel. Trim and door panel in durable die-cast zinc with white powder coat finish. Can be wall-papered or field painted. Trim and panel door are mounted flush with surface with no exposed hardware.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\nWall or ceiling mount. The CLM is fully recessed by means of a steel back-box complete with fully adjustable mounting hardware. The modular assembly and quick connector design allow for fast and easy installation. Universal mounting rails extend to mounting studs in the wall, or rails for suspended ceiling.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series provides illumination with two adjustable high intensity 25 watt MR-11 Halogen lamps which provide up to 85’ of spacing coverage.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\nUL924 Listed\u003cbr\u003e\nNFPA101 Life Safety Code\u003cbr\u003e\nNFPA70 National Electric Code\u003cbr\u003e\nOSHA\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\nFull 3 year warranty\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/CLM-ordering-information_c62bf7bd-1b4a-466c-939e-ceeafbb6782f.jpg?v=1761762657\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441577255219,"sku":"Dual-Lite-CLM50NH25","price":1056.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-CLM50NH25-2.jpg?v=1734123611"},{"product_id":"dual-lite-clm50nh25-cp","title":"Dual-Lite CLM50NH25-CP Mini-Concealed Recessed Emergency Luminaire Nickel Cadmium, 25 Watt Halogen, Chicago Plenum Rated","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series is a concealed and recessed, self-contained emergency light with fully automatic operation suitable for wall or ceiling mount applications. With its 25 watt MR-11 halogen lamps it offers concealed and unobtrusive emergency lighting compliance for small and large open floor plans. The 4” rotating door is flush with trim and mounting surface. Upon loss of power, the door automatically opens to reveal the emergency lighting lamp-heads.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\nRecessed back-box made of galvanized 20 gauge steel. Trim and door panel in durable die-cast zinc with white powder coat finish. Can be wall-papered or field painted. Trim and panel door are mounted flush with surface with no exposed hardware.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\nWall or ceiling mount. The CLM is fully recessed by means of a steel back-box complete with fully adjustable mounting hardware. The modular assembly and quick connector design allow for fast and easy installation. Universal mounting rails extend to mounting studs in the wall, or rails for suspended ceiling.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series provides illumination with two adjustable high intensity 25 watt MR-11 Halogen lamps which provide up to 85’ of spacing coverage.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\nUL924 Listed\u003cbr\u003e\nNFPA101 Life Safety Code\u003cbr\u003e\nNFPA70 National Electric Code\u003cbr\u003e\nOSHA\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\nFull 3 year warranty\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/CLM-ordering-information_c62bf7bd-1b4a-466c-939e-ceeafbb6782f.jpg?v=1761762657\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441577320755,"sku":"Dual-Lite-CLM50NH25-CP","price":904.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-CLM50NH25-CP-2.jpg?v=1734123627"},{"product_id":"dual-lite-clm50nh25-xk","title":"Dual-Lite CLM50NH25-XK Mini-Concealed Recessed Emergency Luminaire Nickel Cadmium, 25 Watt Halogen, Less Rough-In Kit","description":"\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series is a concealed and recessed, self-contained emergency light with fully automatic operation suitable for wall or ceiling mount applications. With its 25 watt MR-11 halogen lamps it offers concealed and unobtrusive emergency lighting compliance for small and large open floor plans. The 4” rotating door is flush with trim and mounting surface. Upon loss of power, the door automatically opens to reveal the emergency lighting lamp-heads.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\nRecessed back-box made of galvanized 20 gauge steel. Trim and door panel in durable die-cast zinc with white powder coat finish. Can be wall-papered or field painted. Trim and panel door are mounted flush with surface with no exposed hardware.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\nWall or ceiling mount. The CLM is fully recessed by means of a steel back-box complete with fully adjustable mounting hardware. The modular assembly and quick connector design allow for fast and easy installation. Universal mounting rails extend to mounting studs in the wall, or rails for suspended ceiling.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\nThe CLM series provides illumination with two adjustable high intensity 25 watt MR-11 Halogen lamps which provide up to 85’ of spacing coverage.\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\nUL924 Listed\u003cbr\u003e\nNFPA101 Life Safety Code\u003cbr\u003e\nNFPA70 National Electric Code\u003cbr\u003e\nOSHA\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\nFull 3 year warranty\u003cbr\u003e\u003cbr\u003e\u003cb\u003eORDERING INFORMATION\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/CLM-ordering-information_c62bf7bd-1b4a-466c-939e-ceeafbb6782f.jpg?v=1761762657\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441577517363,"sku":"Dual-Lite-CLM50NH25-XK","price":2426.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-CLM50NH25-XK-2.jpg?v=1734123643"},{"product_id":"dual-lite-dyn12","title":"Dual-Lite DYN12 12W Industrial High Lumen LED Emergency Light, No Self-Diagnostics, Wet Location, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441582104883,"sku":"Dual-Lite-DYN12","price":675.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12-2.jpg?v=1734124070"},{"product_id":"dual-lite-dyn12-06l","title":"Dual-Lite DYN12-06L 12W NEMA4X Industrial High Lumen LED Emergency Light, No Self-Diagnostics, Wet Location, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441582170419,"sku":"Dual-Lite-DYN12-06L","price":791.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12-06L-2.jpg?v=1734124090"},{"product_id":"dual-lite-dyn12-4x","title":"Dual-Lite DYN12-4X 12W NEMA4X Industrial High Lumen LED Emergency Light, No Self-Diagnostics, NEMA4X\/IP66 Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441582301491,"sku":"Dual-Lite-DYN12-4X","price":786.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12-4X-2.jpg?v=1734124106"},{"product_id":"dual-lite-dyn12-4x-06l","title":"Dual-Lite DYN12-4X-06L 12W NEMA4X Industrial High Lumen LED Emergency Light, No Self-Diagnostics, NEMA4X\/IP66 Rated, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441582334259,"sku":"Dual-Lite-DYN12-4X-06L","price":988.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12-4X-06L-2.jpg?v=1734124122"},{"product_id":"dual-lite-dyn12-4x-fp","title":"Dual-Lite DYN12-4X-FP 12W NEMA4X Industrial High Lumen LED Emergency Light, No Self-Diagnostics, NEMA4X\/IP66 Rated, Food Processing Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441582367027,"sku":"Dual-Lite-DYN12-4X-FP","price":1012.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12-4X-FP-2.jpg?v=1734124138"},{"product_id":"dual-lite-dyn12-4x-fp-06l","title":"Dual-Lite DYN12-4X-FP-06L 12W NEMA4X Industrial High Lumen LED Emergency Light, No Self-Diagnostics, NEMA4X\/IP66 Rated, Food Processing Rated, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441582399795,"sku":"Dual-Lite-DYN12-4X-FP-06L","price":1153.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12-4X-FP-06L-2.jpg?v=1734124158"},{"product_id":"dual-lite-dyn12i","title":"Dual-Lite DYN12I 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, Wet Location, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441582432563,"sku":"Dual-Lite-DYN12I","price":835.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-2.jpg?v=1734124178"},{"product_id":"dual-lite-dyn12i-06l","title":"Dual-Lite DYN12I-06L 12W Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, Wet Location, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441582629171,"sku":"Dual-Lite-DYN12I-06L","price":835.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-06L-2.jpg?v=1734124196"},{"product_id":"dual-lite-dyn12i-4x","title":"Dual-Lite DYN12I-4X 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441583513907,"sku":"Dual-Lite-DYN12I-4X","price":1046.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-4X-2.jpg?v=1734124214"},{"product_id":"dual-lite-dyn12i-4x-06l","title":"Dual-Lite DYN12I-4X-06L 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441584562483,"sku":"Dual-Lite-DYN12I-4X-06L","price":1172.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-4X-06L-2.jpg?v=1734124231"},{"product_id":"dual-lite-dyn12i-4x-fp","title":"Dual-Lite DYN12I-4X-FP 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Food Processing Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441586495795,"sku":"Dual-Lite-DYN12I-4X-FP","price":1652.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-4X-FP-2.jpg?v=1734124248"},{"product_id":"dual-lite-dyn12i-4x-fp-06l","title":"Dual-Lite DYN12I-4X-FP-06L 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Food Processing Rated, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441589150003,"sku":"Dual-Lite-DYN12I-4X-FP-06L","price":1717.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-4X-FP-06L-2.jpg?v=1734124264"},{"product_id":"dual-lite-dyn12i-4x-htr","title":"Dual-Lite DYN12I-4X-HTR 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Heater for Cold Temp, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441589248307,"sku":"Dual-Lite-DYN12I-4X-HTR","price":1172.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-4X-HTR-2.jpg?v=1734124281"},{"product_id":"dual-lite-dyn12i-4x-htr-06l","title":"Dual-Lite DYN12I-4X-HTR-06L 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Heater for Cold Temp, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441589281075,"sku":"Dual-Lite-DYN12I-4X-HTR-06L","price":1138.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-4X-HTR-06L-2.jpg?v=1734124298"},{"product_id":"dual-lite-dyn12i-4x-htr-fp","title":"Dual-Lite DYN12I-4X-HTR-FP 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Heater for Cold Temp, Food Processing Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441589313843,"sku":"Dual-Lite-DYN12I-4X-HTR-FP","price":1749.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-4X-HTR-FP-2.jpg?v=1734124315"},{"product_id":"dual-lite-dyn12i-4x-htr-fp-06l","title":"Dual-Lite DYN12I-4X-HTR-FP-06L 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Heater for Cold Temp, Food Processing Rated, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441589346611,"sku":"Dual-Lite-DYN12I-4X-HTR-FP-06L","price":1532.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-4X-HTR-FP-06L-2.jpg?v=1734124332"},{"product_id":"dual-lite-dyn12i-c1d2-06l","title":"Dual-Lite DYN12I-C1D2-06L 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, C1D2 Class, 6W LED Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The \"Dynamo\" DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441589379379,"sku":"Dual-Lite-DYN12I-C1D2-06L","price":2037.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN12I-C1D2-06L-2.jpg?v=1734124347"},{"product_id":"dual-lite-dyn6","title":"Dual-Lite DYN6 12W NEMA4X Industrial High Lumen LED Emergency Light, No Self-Diagnostics, Wet Location, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441589969203,"sku":"Dual-Lite-DYN6","price":908.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN6-2.jpg?v=1734124364"},{"product_id":"dual-lite-dyn6-4x","title":"Dual-Lite DYN6-4X 12W NEMA4X Industrial High Lumen LED Emergency Light, No Self-Diagnostics, NEMA4X\/IP66 Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441594687795,"sku":"Dual-Lite-DYN6-4X","price":1072.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN6-4X-2.jpg?v=1734124379"},{"product_id":"dual-lite-dyn6i","title":"Dual-Lite DYN6I 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, Wet Location, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441597505843,"sku":"Dual-Lite-DYN6I","price":981.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN6I-2.jpg?v=1734124396"},{"product_id":"dual-lite-dyn6i-4x","title":"Dual-Lite DYN6I-4X 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441600192819,"sku":"Dual-Lite-DYN6I-4X","price":811.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN6I-4X-2.jpg?v=1734124413"},{"product_id":"dual-lite-dyn6i-4x-fp","title":"Dual-Lite DYN6I-4X-FP 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Food Processing Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441602126131,"sku":"Dual-Lite-DYN6I-4X-FP","price":922.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN6I-4X-FP-2.jpg?v=1734124430"},{"product_id":"dual-lite-dyn6i-4x-htr","title":"Dual-Lite DYN6I-4X-HTR 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Heater for Cold Temp, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441602912563,"sku":"Dual-Lite-DYN6I-4X-HTR","price":1500.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN6I-4X-HTR-2.jpg?v=1734124446"},{"product_id":"dual-lite-dyn6i-4x-htr-fp","title":"Dual-Lite DYN6I-4X-HTR-FP 12W NEMA4X Industrial High Lumen LED Emergency Light, Spectron Self-Diagnostics, NEMA4X\/IP66 Rated, Heater for Cold Temp, Food Processing Rated, 3W Lamps","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441605861683,"sku":"Dual-Lite-DYN6I-4X-HTR-FP","price":1254.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYN6I-4X-HTR-FP-2.jpg?v=1734124464"},{"product_id":"dual-lite-dynrd-4x","title":"Dual-Lite DYNRD-4X NEMA4X Rated Double Head Remote Accessory","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441607729459,"sku":"Dual-Lite-DYNRD-4X","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYNRD-4X-2.jpg?v=1734124479"},{"product_id":"dual-lite-dynrd-4x-fp","title":"Dual-Lite DYNRD-4X-FP Food Processing rated Double Head Remote Accessory","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The “Dynamo” DYN Series is a highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes  llumination when primary power is lost. The DYN Series provides the same level of lumen output with no light degradation for the full 90 minutes of battery discharge.\u003cbr\u003e\n  The DYN Series has a flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish. LED based lamp-heads are made of high strength die-cast aluminum with polycarbonate lens. Includes micro-controller based 3-stage charger and Lithium Iron Phosphate(LiFePO4) battery. The DYN Series accepts 120 through 277VAC input at 50 or 60Hz. Not designed for selfdiagnostic operation at 220-240VAC input. Universal mounting plate made of painted stamped steel. The Dynamo is specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series housing is made from durable injection molded ABS thermoplastic and the covers, remote housing and shield are made of polycarbonate. Lamp-heads are made of die-cast aluminum for thermal dissipation. LED lenses are made of polycarbonate.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  The unit includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall. Included is a special bracket to ensure positive pole gripping when using bands. In wet or NEMA4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit. All fittings supplied by others.\u003cbr\u003e\n  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The DYN series provides bright and uniform illumination and is specifically designed for higher mounting heights above 9’. Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each. The LEDs are located in a specially designed heat dissipating lamp-head which is fully adjustable and can be locked into position.\u003cbr\u003e\n  The DYN is designed for full lumen output across the entire 90 minutes of operation. This ensures maximum visibility of the egress path over the full 90 minute discharge period.\u003c\/p\u003e\n\u003cb\u003eOrdering Information\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/DYN-ordering-information_e54b11cc-30ef-48bd-b4f9-3b918b9942bf.jpg?v=1761762929\"\u003e\u003c\/b\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441612546355,"sku":"Dual-Lite-DYNRD-4X-FP","price":516.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-DYNRD-4X-FP-2.jpg?v=1734124494"},{"product_id":"dual-lite-ers-2-2-v","title":"Dual-Lite ERS-2-2-V 30W Square Emergency Light, 2 Lamps, with Voltmeter","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The LITE2 Series are decorator-designed, self-contained emergency lighting squares. The matte-white frame and satin-black housing will complement any decor.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The LITE2 Series comes in single and twin lamp versions. The housing is constructed injection-molded, high-impact thermoplastic. Emergency power source shall be a sealed, maintenance-free, lead-acid battery.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  LITE2 models may be mounted directly to any 31\/2 or 4” octagonal or 4” square box. Recessed mounting is possible through the use of F-SRM kit or -FRM option. All LITE2 units and matching remote fixtures may be semi-recessed using the F-SRM mounting kit. LITE2 emergency units may be fully recessed, when specified with the -FRM option. The F-SRM semi-recessed kit provides a metal ceiling mounting box that allows the unit’s electronics compartment to be recessed into grid type\u003cbr\u003e\n  suspended ceilings leaving only the white light box housing exposed.\u003cbr\u003e\n  LITE2 emergency units ordered with the -FRM fully recessed mounting option are supplied with the units’ test switch and pilot light located under the diffuser lens to allow ease of testing once installed. The fully recessed mounting bar and a decorative trim bezel. -FRM option not available with RERS matching remote square DC fixture.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  Single lamps models utilize a 9 watt miniature wedge-base lamp and twin lamps models utilize two 7.2 watt miniature wedge-base lamps.\u003cbr\u003e\n  They shall produce high-lumen output and the fixture will be equipped with a prismatic lens for uniform illumination. The usual design objective in emergency lighting is to provide a level of illumination sufficient to allow people to leave a building in the event of a power failure.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL 924 Listed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e    Fixture: 3 Years Full, 5 Years Full with Spectron\u003c\/li\u003e\n  \u003cli\u003eBattery: 2 Years Full, 3 Years Pro Rata\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lite2-ordering-information_cb3862df-1671-4615-aca6-766a995003b7.jpg?v=1761764400\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441620312371,"sku":"Dual-Lite-ERS-2-2-V","price":690.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-ERS-2-2-V-2.jpg?v=1734124564"},{"product_id":"dual-lite-ers-2i-2-v","title":"Dual-Lite ERS-2I-2-V 30W Square Emergency Light, 2 Lamps, with Spectron Circuitry and Voltmeter","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The LITE2 Series are decorator-designed, self-contained emergency lighting squares. The matte-white frame and satin-black housing will complement any decor.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The LITE2 Series comes in single and twin lamp versions. The housing is constructed injection-molded, high-impact thermoplastic. Emergency power source shall be a sealed, maintenance-free, lead-acid battery.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  LITE2 models may be mounted directly to any 31\/2 or 4” octagonal or 4” square box. Recessed mounting is possible through the use of F-SRM kit or -FRM option. All LITE2 units and matching remote fixtures may be semi-recessed using the F-SRM mounting kit. LITE2 emergency units may be fully recessed, when specified with the -FRM option. The F-SRM semi-recessed kit provides a metal ceiling mounting box that allows the unit’s electronics compartment to be recessed into grid type\u003cbr\u003e\n  suspended ceilings leaving only the white light box housing exposed.\u003cbr\u003e\n  LITE2 emergency units ordered with the -FRM fully recessed mounting option are supplied with the units’ test switch and pilot light located under the diffuser lens to allow ease of testing once installed. The fully recessed mounting bar and a decorative trim bezel. -FRM option not available with RERS matching remote square DC fixture.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  Single lamps models utilize a 9 watt miniature wedge-base lamp and twin lamps models utilize two 7.2 watt miniature wedge-base lamps.\u003cbr\u003e\n  They shall produce high-lumen output and the fixture will be equipped with a prismatic lens for uniform illumination. The usual design objective in emergency lighting is to provide a level of illumination sufficient to allow people to leave a building in the event of a power failure.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL 924 Listed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e    Fixture: 3 Years Full, 5 Years Full with Spectron\u003c\/li\u003e\n  \u003cli\u003eBattery: 2 Years Full, 3 Years Pro Rata\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lite2-ordering-information_cb3862df-1671-4615-aca6-766a995003b7.jpg?v=1761764400\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441620967731,"sku":"Dual-Lite-ERS-2I-2-V","price":947.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-ERS-2I-2-V-2.jpg?v=1734124583"},{"product_id":"dual-lite-ess-i-v","title":"Dual-Lite ESS-I-V 10W Square Emergency Light, 1 Lamp, with Spectron Circuitry and Voltmeter","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The LITE2 Series are decorator-designed, self-contained emergency lighting squares. The matte-white frame and satin-black housing will complement any decor.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The LITE2 Series comes in single and twin lamp versions. The housing is constructed injection-molded, high-impact thermoplastic. Emergency power source shall be a sealed, maintenance-free, lead-acid battery.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  LITE2 models may be mounted directly to any 31\/2 or 4” octagonal or 4” square box. Recessed mounting is possible through the use of F-SRM kit or -FRM option. All LITE2 units and matching remote fixtures may be semi-recessed using the F-SRM mounting kit. LITE2 emergency units may be fully recessed, when specified with the -FRM option. The F-SRM semi-recessed kit provides a metal ceiling mounting box that allows the unit’s electronics compartment to be recessed into grid type\u003cbr\u003e\n  suspended ceilings leaving only the white light box housing exposed.\u003cbr\u003e\n  LITE2 emergency units ordered with the -FRM fully recessed mounting option are supplied with the units’ test switch and pilot light located under the diffuser lens to allow ease of testing once installed. The fully recessed mounting bar and a decorative trim bezel. -FRM option not available with RERS matching remote square DC fixture.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  Single lamps models utilize a 9 watt miniature wedge-base lamp and twin lamps models utilize two 7.2 watt miniature wedge-base lamps.\u003cbr\u003e\n  They shall produce high-lumen output and the fixture will be equipped with a prismatic lens for uniform illumination. The usual design objective in emergency lighting is to provide a level of illumination sufficient to allow people to leave a building in the event of a power failure.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  UL 924 Listed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e    Fixture: 3 Years Full, 5 Years Full with Spectron\u003c\/li\u003e\n  \u003cli\u003eBattery: 2 Years Full, 3 Years Pro Rata\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lite2-ordering-information_cb3862df-1671-4615-aca6-766a995003b7.jpg?v=1761764400\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441625293107,"sku":"Dual-Lite-ESS-I-V","price":679.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-ESS-I-V-2.jpg?v=1734124635"},{"product_id":"dual-lite-ev2","title":"Dual-Lite EV2 1W Architectural LED Emergency Light,  White Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441628668211,"sku":"Dual-Lite-EV2","price":78.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV2-2.jpg?v=1734124653"},{"product_id":"dual-lite-ev2d","title":"Dual-Lite EV2D 1W Architectural LED Emergency Light, Damp Location Listed, White Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441629880627,"sku":"Dual-Lite-EV2D","price":91.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV2D-2.jpg?v=1734124672"},{"product_id":"dual-lite-ev2db","title":"Dual-Lite EV2DB 1W Architectural LED Emergency Light, Damp Location Listed, Black Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441630830899,"sku":"Dual-Lite-EV2DB","price":91.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV2DB-2.jpg?v=1734124690"},{"product_id":"dual-lite-ev2di","title":"Dual-Lite EV2DI 1W Architectural LED Emergency Light, Damp Location Listed, Spectron Self-Diagnostics, White Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441631289651,"sku":"Dual-Lite-EV2DI","price":158.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV2DI-2.jpg?v=1734124708"},{"product_id":"dual-lite-ev2di-24k","title":"Dual-Lite EV2DI-24K 1W Architectural LED Emergency Light, Damp Location Listed, Spectron Self-Diagnostics, 220-240VAC 60Hz with Spectron, White Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441633026355,"sku":"Dual-Lite-EV2DI-24K","price":145.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV2DI-24K-2.jpg?v=1734124725"},{"product_id":"dual-lite-ev2dib","title":"Dual-Lite EV2DIB 1W Architectural LED Emergency Light, Damp Location Listed, Spectron Self-Diagnostics, Black Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441634402611,"sku":"Dual-Lite-EV2DIB","price":165.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV2DIB-2.jpg?v=1734124742"},{"product_id":"dual-lite-ev4d","title":"Dual-Lite EV4D 1W Architectural LED Emergency Light with Remote Capacity, Damp Location Listed, White Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441636729139,"sku":"Dual-Lite-EV4D","price":98.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV4D-2.jpg?v=1734124757"},{"product_id":"dual-lite-ev4d-02l","title":"Dual-Lite EV4D-02L 1W Architectural LED Emergency Light with Remote Capacity, Damp Location Listed, with 2W LED Heads, White Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441637417267,"sku":"Dual-Lite-EV4D-02L","price":134.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV4D-02L-2.jpg?v=1734124775"},{"product_id":"dual-lite-ev4d-02l-0","title":"Dual-Lite EV4D-02L-0 1W Architectural LED Emergency Light with Remote Capacity, Damp Location Listed, with 2W LED Heads, No-Head Option to Run External Remotes Only, White Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441640399155,"sku":"Dual-Lite-EV4D-02L-0","price":119.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV4D-02L-0-2.jpg?v=1734124792"},{"product_id":"dual-lite-ev4db","title":"Dual-Lite EV4DB 1W Architectural LED Emergency Light with Remote Capacity, Damp Location Listed, Black Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441641218355,"sku":"Dual-Lite-EV4DB","price":124.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV4DB-2.jpg?v=1734124809"},{"product_id":"dual-lite-ev4db-02l","title":"Dual-Lite EV4DB-02L 1W Architectural LED Emergency Light with Remote Capacity, Damp Location Listed, with 2W LED Heads, Black Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441642594611,"sku":"Dual-Lite-EV4DB-02L","price":126.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV4DB-02L-2.jpg?v=1734124827"},{"product_id":"dual-lite-ev4di","title":"Dual-Lite EV4DI 1W Architectural LED Emergency Light with Remote Capacity, Damp Location Listed, Spectron Self-Diagnostics, White Finish","description":"\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has a flame-rated, UV stable thermoplastic housing and a lightly textured white finish. Integral LED based lamp-heads are fully adjustable. Unit provides a full 90 minutes of emergency lighting.\u003cbr\u003e\n  Includes micro-controlled pulse charger and nickel metal hydride (NiMH) battery. The EV accepts 120\/277VAC input at 60 Hz and optional 220-240VAC input at 50-60 Hz with self-diagnostics option.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series housing and back-plate are made from durable injection molded thermoplastic. Lamp-head front halves are made of die-cast aluminum for thermal dissipation. Back half of lamp-head made of ABS thermoplastic. LED lens are made of acrylic.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003e\n  Universal mounting template molded in the back plate aids in quick installation. Unit mounts to all single gang and standard 3 1\/2” and 4” square or octagonal electrical boxes. Conduit entry through a molded-in knock-out at the top center. Pre-stripped AC input leads provided. Unit may be ceiling or wall mounted.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eIllumination\u003c\/strong\u003e\u003cbr\u003e\n  The EV Series provides bright and uniform illumination and increased spacing by using 2 high power LEDs which are mounted in a specially designed heat dissipation lamp-head. Each lamp-head is fully adjustable and positioning is maintained by a friction fit design.\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eCompliances\u003c\/strong\u003e\u003cbr\u003e\n  Listed to UL924 Standard, NFPA 101, NFPA 70 Damp Location Listed Optional RoHS\u003c\/p\u003e\u003cp\u003e\n  \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e\n  LED Lifetime Warranty\u003cbr\u003e\n  EV Full 3 year warranty\u003cbr\u003e\n  EV with Spectron® Full 5 year warranty\u003c\/p\u003e\n\n\u003cb\u003eOrdering Information\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/EV-ordering-information_3d84fab8-a85c-4e03-afd8-c0ec72c9ac2b.jpg?v=1761764508\"\u003e","brand":"Hubbell Lighting","offers":[{"title":"Default Title","offer_id":45441645281587,"sku":"Dual-Lite-EV4DI","price":159.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Dual-Lite-EV4DI-2.jpg?v=1734124844"}],"url":"https:\/\/electricbargainstores.com\/collections\/indoor-emergency-lighting.oembed","provider":"Electric Bargain Store","version":"1.0","type":"link"}