{"title":"Lithonia LRP LED Edge Lit Exit Sign","description":"","products":[{"product_id":"lithonia-lrp-1-110827","title":"Lithonia LRP 1 RC LA 120\/277 LED Edge Lit Exit Sign, Brushed Aluminum Housing, Red Letters on Clear Background, Left Directional Indicator, 120-277V","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371394470195,"sku":"Lithonia-LRP-1-110827","price":402.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1-110827-2.jpg?v=1737321757"},{"product_id":"lithonia-lrp-1-110828","title":"Lithonia LRP 1 GC LA 120\/277 LED Edge Lit Exit Sign, Brushed Aluminum Housing, Green Letters on Clear Background, Left Directional Indicator, 120-277V","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371394535731,"sku":"Lithonia-LRP-1-110828","price":446.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1-110828-2.jpg?v=1737321774"},{"product_id":"lithonia-lrp-1-110829","title":"Lithonia LRP 1 RC RA 120\/277 LED Edge Lit Exit Sign, Brushed Aluminum Housing, Red Letters on Clear Background, Right Directional Indicator, 120-277V","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC T\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003eitle 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371394634035,"sku":"Lithonia-LRP-1-110829","price":446.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1-110829-2.jpg?v=1737321792"},{"product_id":"lithonia-lrp-1-110830","title":"Lithonia LRP 1 GC RA 120\/277 LED Edge Lit Exit Sign, Brushed Aluminum Housing, Green Letters on Clear Background, Right Directional Indicator, 120-277V","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371394732339,"sku":"Lithonia-LRP-1-110830","price":446.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1-110830-2.jpg?v=1737321808"},{"product_id":"lithonia-lrp-1-110831","title":"Lithonia LRP 1 RC 120\/277 LED Edge Lit Exit Sign, Brushed Aluminum Housing, Red Letters on Clear Background, No Directional Indicator, 120-277V","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371394765107,"sku":"Lithonia-LRP-1-110831","price":395.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1-110831-2.jpg?v=1737321825"},{"product_id":"lithonia-lrp-1-110832","title":"Lithonia LRP 1 GC 120\/277 LED Edge Lit Exit Sign, Brushed Aluminum Housing, Green Letters on Clear Background, No Directional Indicator, 120-277V","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371394797875,"sku":"Lithonia-LRP-1-110832","price":387.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1-110832-2.jpg?v=1737321842"},{"product_id":"lithonia-lrp-110386","title":"Lithonia LRP 1 GMR 120\/277 PNL 120\/277V LED Edge Lit Exit Sign, Brushed Aluminum, Single Face, Green on Mirror, AC Only, Ceiling or Back Mount, Panel Assembly Only","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption ELN operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371395354931,"sku":"Lithonia-LRP-110386","price":300.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110386-2.jpg?v=1737321941"},{"product_id":"lithonia-lrp-110457","title":"Lithonia LRP 2 GMR DA 120\/277 EL N PNL LED Edge Lit Exit Sign, Brushed Aluminum Housing, Double Face, Green on Mirror Letters, Double Face Directional Indicators, 120\/277V, Ni-Cd Battery, Ceiling or Back Mount, Complete Exit Panel","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters ? 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption ? EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) ? low-profile mounting canopy attaches exit to J-box. No rough-in section required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371395486003,"sku":"Lithonia-LRP-110457","price":653.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110457-2.jpg?v=1737321958"},{"product_id":"lithonia-lrp-110624","title":"Lithonia LRP 1 GC 120\/277 EL N LED Edge Lit Exit Sign Clear Acrylic Single Face Green Letters Battery Backup","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371395617075,"sku":"Lithonia-LRP-110624","price":826.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110624-2.jpg?v=1737321974"},{"product_id":"lithonia-lrp-110699","title":"Lithonia LRP 2 RMR 120\/277 Edge Lit LED Exit Sign, Brushed Aluminum, Double Face, Red on Mirror, 120-277V","description":"\u003cb\u003ePRODUCT FAMILY SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption ELN operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371395715379,"sku":"Lithonia-LRP-110699","price":413.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110699-2.jpg?v=1737321990"},{"product_id":"lithonia-lrp-110777","title":"Lithonia LRP W 1 RC 120\/277 EL N LED Edge Lit Exit Sign, White Housing, Single Face, Red on White letters, 120-277V, Nickel Cadmium  Battery Ceiling or Back Mount, Complete Exit Panel and Rough-In Section","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371395780915,"sku":"Lithonia-LRP-110777","price":553.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110777-2.jpg?v=1737322007"},{"product_id":"lithonia-lrp-110803","title":"Lithonia LRP 2 RMR LRA 120\/277 EL N Edge Lit LED Exit Sign, Brushed Aluminum, Double Face, Red on Mirror, Left and Right Directional Indicators, 120-277V, Nickel Cadmium Battery Emergency Operation","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters ? 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption ? EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) ? low-profile mounting canopy attaches exit to J-box. No rough-in section required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371395977523,"sku":"Lithonia-LRP-110803","price":807.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110803-2.jpg?v=1737322024"},{"product_id":"lithonia-lrp-110804","title":"Lithonia LRP 2 GMR LRA 120\/277 EL N Edge Lit LED Exit Sign, Brushed Aluminum, Double Face, Green on Mirror, Left and Right Directional Indicators, 120-277V, Nickel Cadmium Battery Emergency Operation","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters � 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption � EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) � low-profile mounting canopy attaches exit to J-box. No rough-in section required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371396141363,"sku":"Lithonia-LRP-110804","price":755.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110804-2.jpg?v=1737322041"},{"product_id":"lithonia-lrp-110805","title":"Lithonia LRP 2 RMR 120\/277 EL N Edge Lit LED Exit Sign, Brushed Aluminum, Double Face, Red on Mirror, 120-277V, Nickel Cadmium Battery Emergency Operation","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters ? 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption ? EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) ? low-profile mounting canopy attaches exit to J-box. No rough-in section required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371396272435,"sku":"Lithonia-LRP-110805","price":777.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110805-2.jpg?v=1737322059"},{"product_id":"lithonia-lrp-110806","title":"Lithonia LRP 2 GMR 120\/277 EL N Edge Lit LED Exit Sign, Brushed Aluminum, Double Face, Green on Mirror, 120-277V, Nickel Cadmium Battery Emergency Operation","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters � 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption � EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) � low-profile mounting canopy attaches exit to J-box. No rough-in section required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371396305203,"sku":"Lithonia-LRP-110806","price":755.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-110806-2.jpg?v=1737322075"},{"product_id":"lithonia-lrp-2-110825","title":"Lithonia LRP 2 RMR DA 120\/277 LED Edge Lit Exit Sign, Brushed Aluminum Housing, Red Letters on Mirror Background, Double Face Directional Indicator, 120-277V","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371397189939,"sku":"Lithonia-LRP-2-110825","price":422.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-2-110825-2.jpg?v=1737322093"},{"product_id":"lithonia-lrp-2-110826","title":"Lithonia LRP 2 GMR DA 120\/277 LED Edge Lit Exit Sign, Brushed Aluminum Housing, Green Letters on Mirror Background, Double Face Directional Indicator, 120-277V","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":50371397288243,"sku":"Lithonia-LRP-2-110826","price":496.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-2-110826-2.jpg?v=1737322109"},{"product_id":"lithonia-lrp-1109944","title":"Lithonia LRP W 1 GC RA 120\/277LED Edge Lit Exit Sign, White Housing, Single Face, Green on Clear, Right Indicator, 120-277V, AC Only, Ceiling or Back Mount, Complete Exit Panel and Rough-In Section","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":52658557288755,"sku":"Lithonia-LRP-1109944","price":442.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1109944-2.jpg?v=1762598004"},{"product_id":"lithonia-lrp-1109945","title":"Lithonia LRP W 1 RC RA 120\/277LED Edge Lit Exit Sign, White Housing, Single Face, Red on Clear, Right Indicator, 120-277V, AC Only, Ceiling or Back Mount, Complete Exit Panel and Rough-In Section","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":52658558566707,"sku":"Lithonia-LRP-1109945","price":446.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1109945-2.jpg?v=1762598016"},{"product_id":"lithonia-lrp-1109946","title":"Lithonia LRP W 1 GC LA 120\/277LED Edge Lit Exit Sign, White Housing, Single Face, Green on Clear, Left Indicator, 120-277V, AC Only, Ceiling or Back Mount, Complete Exit Panel and Rough-In Section","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":52658561417523,"sku":"Lithonia-LRP-1109946","price":446.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1109946-2.jpg?v=1762598028"},{"product_id":"lithonia-lrp-1109947","title":"Lithonia LRP W 1 RC LA 120\/277LED Edge Lit Exit Sign, White Housing, Single Face, Red on Clear, Left Indicator, 120-277V, AC Only, Ceiling or Back Mount, Complete Exit Panel and Rough-In Section","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":52658562007347,"sku":"Lithonia-LRP-1109947","price":446.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1109947-2.jpg?v=1762598041"},{"product_id":"lithonia-lrp-1109948","title":"Lithonia LRP W 1 GC 120\/277LED Edge Lit Exit Sign, White Housing, Single Face, Green on Clear, No Indicator, 120-277V, AC Only, Ceiling or Back Mount, Complete Exit Panel and Rough-In Section","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":52658563776819,"sku":"Lithonia-LRP-1109948","price":421.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1109948-2.jpg?v=1762598052"},{"product_id":"lithonia-lrp-1109949","title":"Lithonia LRP W 1 RC 120\/277LED Edge Lit Exit Sign, White Housing, Single Face, Red on Clear, No Indicator, 120-277V, AC Only, Ceiling or Back Mount, Complete Exit Panel and Rough-In Section","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":52658566267187,"sku":"Lithonia-LRP-1109949","price":434.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1109949-2.jpg?v=1762598064"},{"product_id":"lithonia-lrp-1110073","title":"Lithonia LRP 1 RC 120\/277 EL N PNL LED Edge Lit Exit Sign Clear Acrylic Single Face Red Letters Battery Backup, no Rough in Kit","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_03d280fc-3e99-4817-8a10-40fd54628df7.jpg?v=1762597959\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":52658568790323,"sku":"Lithonia-LRP-1110073","price":425.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1110073-2.jpg?v=1762598076"},{"product_id":"lithonia-lrp-1102387","title":"Lithonia LRP W 2 RW 120\/277 EL N Edge Lit LED Exit Sign, White Housing, Double Face, Red Letters on White  Background, 120-277V, Nickel Cadmium Battery","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters ? 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption ? EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) ? low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_91c972eb-c005-45e9-a34e-c413ae04017b.jpg?v=1775830592\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":53223471841587,"sku":"Lithonia-LRP-1102387","price":902.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1102387-2.jpg?v=1775830594"},{"product_id":"lithonia-lrp-1102388","title":"Lithonia LRP W 2 GW 120\/277 EL N Edge Lit LED Exit Sign, White Housing, Double Face, Green Letters on White  Background, 120-277V, Nickel Cadmium Battery","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters ? 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption ? EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) ? low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_91c972eb-c005-45e9-a34e-c413ae04017b.jpg?v=1775830592\"\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":53223473119539,"sku":"Lithonia-LRP-1102388","price":902.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1102388-2.jpg?v=1775830608"},{"product_id":"lithonia-ela-110617","title":"Lithonia ELA R LRIS 120\/277 EL N Single-Face, Red LED Emergency Rough-In Section","description":"Single-face, red LED emergency rough-in section.\u003cbr\u003eWhen ordering recessed rough-in separately, all options must be included with rough-in\nnomenclature. Example: ELA LRIS 277 X2 F.\u003cbr\u003eRough-in supplied standard with exit unless PNL suffix is specified. Order separately only if\nneeded for early installation.\u003cbr\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":53378095776051,"sku":"Lithonia-ELA-110617","price":384.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-ELA-110617-2.jpg?v=1779335216"},{"product_id":"lithonia-lrp-1-110633","title":"Lithonia LRP 1 RW LA 120\/277 PNL Edge Lit LED Exit Sign, Brushed Aluminum Housing, Red Letters on White Background, Left Directional Indicator, 120-277V, Panel only","description":"\u003cb\u003ePRODUCT SPECIFICATIONS\u003cbr\u003eINTENDED USE\u003c\/b\u003e -- Suitable for architectural applications where aesthetics and superior performance\nare required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCONSTRUCTION \u003c\/b\u003e-- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate\nvisible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.\nStandard housing finish is brushed aluminum.\nPrecision-molded, textured letters – 6\" high with 3\/4\" stroke, with 100 ft viewing distance rating, based\nupon UL924 standard. Chevron indicator direction must be specified.\nRecessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum\nhousing trim mounts flush onto wall or ceiling.\nMounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOPTICS\u003c\/b\u003e -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.\nLow energy consumption -- EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V\nsingle-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V\nsingle-face green sign.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELECTRICAL \u003c\/b\u003e-- Dual voltage input capability (120\/277V).\nSealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current\nseries charger, 24-hour recharge after 90-minute discharge.\nPolarized battery connector simplifies installation and maintenance; prevents charger damage due to\nimproper connection.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION \u003c\/b\u003e-- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum\nwall or ceiling opening 13-5\/8\" L x 4-1\/2\" W x 3-1\/8\" D.\nAdjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed\nopenings. Trim ring has 3\/4\" variable depth adjustment to ensure flush fit against surface of wall or ceiling.\nPlug-in wire connections and self-captive mounting screws for mounting panel\/trim to rough-in section.\nTop Mount (TM) --low-profile mounting canopy attaches exit to J-box. No rough-in section required.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLISTINGS \u003c\/b\u003e-- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,\nFCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for\nless than 20W energy consumption.\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWARRANTY \u003c\/b\u003e-- 5-year limited warranty\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/lithonia-LRP-LED-ordering-information_91c972eb-c005-45e9-a34e-c413ae04017b.jpg?v=1775830592\"\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Lithonia Lighting","offers":[{"title":"Default Title","offer_id":53378103247155,"sku":"Lithonia-LRP-1-110633","price":317.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/6625\/4899\/files\/Lithonia-LRP-1-110633-2.jpg?v=1779335353"}],"url":"https:\/\/electricbargainstores.com\/collections\/lithonia-lrp-led-edge-lit-exit-sign.oembed?page=2","provider":"Electric Bargain Store","version":"1.0","type":"link"}