DECDICATED 120V ONLY FIXTURES (-1)
Incandescent, Magnetic Low Voltage and Electronic Low Voltage Dimming

• Dimmable with the use of most forward and reverse phase dimmers
• Dimming range of 100% down to 5% or lower with a minimum load of one fixture; both dimming range and maximum rated load may vary depending on dimmer model
• See maximum load calculations below to identify max number of luminaires per dimmer.

Forward Phase
(Incandescent and Magnetic Low Voltage)
Example: Fixture Rating = 13W
Dimmer Rating = 600W
Equivalent Incandescent Load (EIL) = 50%
(600/13W) X 0.5 = 23 Fixtures per Dimmer

* Aculux recommended dimmers

Reverse Phase
(Electronic Low Volatge)
Example: Fixture Rating = 13W
Dimmer Rating = 600W
Equivalent Incandescent Load (EIL) = 75%
(600/13W) X 0.75 = 34 Fixtures per Dimmer

* Aculux recommended dimmers

* Aculux recommended dimmers

UNIVERSAL 120-277V FIXTURES

0-10V Dimming (-U)

• Dimmable with the use of most 0-10V protocol dimmers
• Dimming range of 100% to 10%.

* Aculux recommended dimmers

* Aculux recommended dimmers

DMX Dimming (-M)

• Compatible with ANSI+E1.11-2008R2013 (USITT DMX512-A) controller and system equipment.
  

DALI Dimming (-A)

• Compatible with IEC 62386-207 and IEC 62386-102 certified controller and system equipment.

Lutron HI-Lume A-Series Driver
120V-277V 3-Wire Fluorescent Controls and EcoSystem Digital Controls (-L)

• For a list of compatible dimmers, please reference Lutron’s Report Card for EcoSystem and 3-Wire Control dimming systems located at: http://www.lutron.com/TechnicalDocumentLibrary/EcoSystem_3-wire_report_card.pdf

120V 2-Wire Forward Phase Controls (-D)

• For a list of compatible dimmers, please reference Lutron’s Report Card for 2-Wire Control dimming systems located at: http://www.lutron.com/TechnicalDocumentLibrary/2-wire_Fwd_phase_report_card.pdf