Halo Recessed Commercial HC425D010REM7 4" New Construction Housing, 2500 Lumens, 120-277V, 0-10V 1%-100% Dimming, 7 Watt Emergency Battery Pack with Remote Test

Home > BRANDS > Halo Lighting > Halo Recessed Commercial > Halo Recessed 4" Commercial LED > Halo Recessed 4" Commercial LED Housing >

Alternative Views:

Our Price: $368.84

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-HC425D010REM7

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT FAMILY SPECIFICATIONS
Housing Frame

Boat shaped galvanized steel plaster frame with adjustable plaster lip
Accommodates 1/2" to 1-1/2" thick ceilings
Installs in new construction or from below the finished ceiling (non-accessible) for remodeling
Provided with two remodel clips to secure the frame to the ceiling

Universal Mounting Bracket

Adjusts 2" vertically from above and below the ceiling
Use with the included mounting bars or with 1/2" Electric Metallic Tube (EMT)
Removable to facilitate remodeling installation from below the finished ceiling

Mounting Bars

Captive pre-installed No Fuss mounting bars lock to T-grid with screwdriver or pliers
Centering detents allow for consistent positioning of fixtures

Driver

Field-replaceable constant current driver provides low noise operation
Universal 120-277VAC 50/60Hz input standard
Continuous, 1% to 100% dimming with 0-10V analog control
Optional low-voltage DC driver for use with Distributed Low Voltage Power (DLVP) system
Distributed Low Voltage Power (DLVP) system combines power, lighting and controls with ease of installation (refer to DLVP Design Guide at www.cooperlighting.com for details)

Emergency Option

Provides 90 minutes of standby lighting, meeting most life safety codes for egress lighting
Available with integral or remote charge indicator and test switch
Available Self-Test (self-diagnostic) with remote charge indicator and test switch
Rapid Response emergency ordering option for quick-turn projects

Connected Lighting System Options
Two WaveLinx connected systems to choose. Summary information provided below, refer to WaveLinx system specifications and application guides for details.
WaveLinx System Tilemount Sensor Kit

WaveLinx WTA tile mount sensor kit offers daylight dimming, PIR motion sensing, scene and zone configuration, automatic commissioning; and optional RLTS - Real Time Location Services available.

WaveLinx Lite System Tilemount Sensor Kit

WaveLinx Lite WTK tile mount sensor kit offers daylight dimming and PIR motion sensing, scene and grouping configuration.

WaveLinx Tilemount Kits Application

The WTA and WTK tilemount kits include a control module mounted on the luminaire junction box via 1/2” knock-out, and a tilemount sensor on 54-inch whip; for ceiling installation by direct-mount spring clips or via mounting bracket in octagon ceiling boxes.
The WTA and WTK tilemount kits may be ordered as factory installed on the luminaire, or ordered eparately as a field installed accessory kit.

Junction Box

Galvanized steel junction box
20 in3 internal volume excluding voltage barrier
25 in3 internal total volume
Voltage barrier for 0-10V dimming wires (occupies one 1/2" pry-out space)
Listed for eight #12 AWG (four in, four out) 90 degrees C conductors and feed-thru branch wiring
Three 1/2" and two 3/4" trade size pry-outs available
Three 4-port push wire nuts for mains voltage with 1-port for fixture connection

Compliance

cULus Listed to UL 1598 / C22.2 No. 250.0, suitable for damp locations and wet locations in covered ceilings only
Emergency options provided with UL Listed emergency drivers to UL 924 / C22.2 No. 141, suitable for indoor/damp locations
IP20 - Above finished ceiling; IP64 - Below finished ceiling
Non-Insulated ceiling (Non-IC) rated for 2000, 2500, 3000, 3500, 4000, 4500, 5000, 5500, 6000 lumen models (insulation must be kept 3" from top and sides)
Insulated ceiling (IC) rated for 500, 750, 1000, 1500 lumen models and suitable for direct contact with air permeable insulation* (IC models are also suitable for Non-IC installations)
Non-IC marked spacing required for 4500, 5000, 5500, 6000 lumen models
- Marked Spacing Center to Center of Adjacent Luminaires = 36”
- Center of Luminaire to Building Member = 18”
- Minimum overhead = 0.5”
Airtight per ASTM-E283-04
Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
EMI/RFI emissions FCC CFR Title 47 Part 15 Class A at 120/277V
Contains no mercury or lead and RoHS compliant
Photometric testing completed in accordance of IES LM-79-08
Lumen maintenance projection in accordance of IES LM-80-08 and TM-21-11
1,000 and 1,500 lumen, 90 CRI, ICAT models may be used to comply with State of California Title 24 residential code, per JA8 certification standards
May be used to comply with State of California Title 24 non-residential code as a dimmable LED luminaire
ENERGY STAR certified, reference certified light fixtures database

*Not for use in direct contact with spray foam insulation, consult NEMA LSD57-2013

Warranty

Five year limited warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Commercial > Halo Recessed 4" Commercial LED > Halo Recessed 4" Commercial LED Housing