Halo Recessed RSQ5089FS1EMWWB 5" Square All-Purpose LED Retrofit Module, 800 Lumens, 90 CRI, Field Selectable 2700K-5000K, 120V, Matte White Flange and Baffle

Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 5 Inch LED Integrated Recessed Lighting > Halo 5 inch LED Recessed Downlight Series >

Alternative Views:

Our Price: $25.18

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-RSQ5089FS1EMWWB

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT DESCRIPTION
The RSQ5 is an integrated LED module / trim with a square shallow lens suitable for new construction, remodel and retrofit installation. Certified for use with Halo and compatible 5" housings and can be used with housings in direct contact with insulation. Integral gasket provides airtight compliance in non-airtight housings, provides code compliance and additional energy savings. Use for general area lighting in low to medium height ceilings where energy savings and long life are desired.

PRODUCT SPECIFICATIONS
MODULE

Module / trim is field interchangeable and upgradable, LED module consists of LED array, optical assembly, driver and self-flanged trim
Integral aluminum heat sink provides passive thermal cooling achieving L70 at 70,000 hours in IC and non-IC applications.

LED ARRAY

Plurality of mid-power LEDs provide a uniform source with high efficiency and long life
Available in 90 CRI minimum, R9 greater than 50 and color accuracy within 4 SDCM provides color accuracy and uniformity
Available in 2700, 3000, 3500 and 4000 K fixed CCT
Optional field selectable color temperature, select from 2700, 3000, 3500, 4000 and 5000 K CCT

OPTICAL ASSEMBLY

Precision molded optic organizes source flux into wide distribution, useful for general area lighting
Regressed flat lens provides uniformity
Meets Energy Star color angular uniformity requirements, color deviation is less than 0.006 u' v

CONNECTORS

Two-conductor wire mount CJT type connector is rated for 120V and mates with LED housings or E26 adapter (provided)

DRIVER

Standard 1E constant current driver option with 120V 60 Hz input provides quiet operation
Leading or trailing edge phase cut dimming to 5% with select controls, meets CA T24 flicker requirements

RETENTION

Steel torsion springs hold module securely in the housing
Rotates more or less 45 degree allowing trim to be aligned with architecture
Module / trim can be removed from below the aperture for service or replacement
Optional friction blades (provided) for installation in housings without torsion spring receivers

TRIM

Die cast aluminum trim can be removed in the field and replaced with optional designer series trims to match many dÃ©cors
Step baffle provides additional cutoff to source

GASKETS

Closed cell gaskets achieve restrictive airflow requirements without additional caulking

COMPLIANCE

UL Certified Safety, US & CA when used with Halo and otherâ€™s housings, see instruction sheet for conditions of acceptability
Wet location listed and IP55 ingress protection rated, covered ceiling only
Airtight per ASTM-E283-04
Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
Contains no mercury or lead and RoHS compliant
Photometric testing in accordance with IES LM-79-08
Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
Can be used for State of California Title 24 high efficacy LED compliance under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2016 JA8 High Efficacy Lighting
Certified to State of California Title 20, State-regulated LED Lamp; reference Modernized Appliance
Efficiency Database System (MAEDBS) for State-regulated

LED Lamp