Request a Quote

  Home > BRANDS > Wattstopper > Power Packs and Load Controllers > Power Packs >

Wattstopper LS-102 Lightsaver On/Off Closed Loop Photosensor with Automatic Commission
Wattstopper LS-102 Lightsaver On/Off Closed Loop Photosensor with Automatic Commission
 
Our Price: $105.03
Request Large Quantity Quote




Model: WATTSTOPPER-LS-102
Qty:

Technical Spec Downloads
 
Technical Spec
PRODUCT DESCRIPTION
The LS-102 Daylighting Controller is a single zone, on/off switching device designed to be installed in a closed loop application. A self-contained 24 VDC device with an extended range of 1-1400 footcandles, the LS-102 requires a low voltage power pack to operate. The controller consists of an advanced digital multi-band photosensor, an on-board microcontroller, and an LCD display. This photosensor is positioned behind a 100º cone that cuts off unwanted light, preventing false triggers.

PRODUCT FEATURES
  • Single zone, on/off switching photosensor
  • Automatic setpoint selection
  • Easy-to-read LCD display and LED status indicators
  • Automatic startup/ calibration
  • Digital multi-band photosensor
  • Multiple user-adjustable control parameters
PRODUCT SPECIFICATIONS
  • Operating voltage: 12/24 VDC
  • Power consumption: 7mA @ 24VDC
  • Output signal: 24VDC; maximum 120 mA
  • Dimensions: 2.4" diameter x 0.7" deep (61mm x 17mm)
  • Operating temperature: 32° to 120°F (0° to 49°C)
  • Operating humidity: 5% to 95% RH, non-condensing
  • Automatic setpoint calculation
  • On Setpoint Range: 1 to 850 footcandles
  • Status indicator: Multi-function green LED
  • Easy-to-read LCD display prompts installer through set-up
  • Four user-adjustable parameters: on setpoint, off setpoint, off setpoint time delay, and "Hold-On While Occupied"
  • Mode (if wired with an occupancy sensor)
  • Test mode overrides programmed time delay, enabling installer to verify accuracy of settings
  • Control load status verification allows testing and confirmation that wiring is correct
  • LED status indicator identifies when device is in override or test mode, or if device has switched lights on or off
  • One-hour manual override capability (when wired with low voltage, push button wall switch)
  • Programmable in most daylight conditions
  • UL listed
  • Indoor use only
  • Five year warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Wattstopper > Power Packs and Load Controllers > Power Packs
We Our Customers!

Thanks for shopping with us today

Click here to get a promo code for 10% off your next order

How can we help you?
Live Chat