Beacon VP-2-320L-185-3K7-4W-UNV-ASQU-DBT Size 2 LED Area Light, 27000 Lumens, 3000K, 70 CRI, Type 4 Wide Dist, 120-277V, Universal Arm Mount for Square Pole, Dark Bronze Matte Textured

Home > BRANDS > Beacon > Area, Site and Roadway > VP Area Light >

Alternative Views:

Our Price: $1,073.74

Usually Ships in 3-5 business days. Urgent Project? Contact Us.

Model: BEACON-VP-172

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT FAMILY SPECIFICATIONS
CONSTRUCTION

Die-cast housing with hidden vertical heat fins are optimal for heat dissipation while keeping a clean smooth outer surface
Corrosion resistant, die-cast aluminum housing with 1000 hour powder coat paint finish
External hardware is corrosion resistant

OPTICS

Micro Strike Optics (160, 320, 480, or 720 LED counts) maximize uniformity in applications and come standard with mid-power LEDs which evenly illuminate the entire luminous surface area to provide a low glare appearance. Catalog logic found on page 2
Strike Optics (36, 72, 108, or 162 LED counts) provide best in class distributions and maximum pole spacing in new applications with high powered LEDs. Strike optics are held in place with a polycarbonate bezel to mimic the appearance of the Micro Strike Optics so both solutions can be combined on the same application. Catalog logic found on page 3
Both optics maximize target zone illumination with minimal losses at the house-side, reducing light trespass issues. Additional backlight control shields and house side shields can be added for further reduction of illumination behind the pole
One-piece silicone gasket ensures a weatherproof seal
Zero up-light at 0 degrees of tilt
Field rotatable optics

INSTALLATION

Mounting patterns for each arm can be found on page 11
Optional universal mounting block for ease of installation during retrofit applications. Available as an option (ASQU) or accessory for square and round poles
All mounting hardware included
Knuckle arm fitter option available for 2-3/8” OD tenon
For products with EPA less than 1 mounted to a pole greater that 20ft, a vibration damper is recommended

ELECTRICAL

Universal 120-277 VAC or 347-480 VAC input voltage, 50/60 Hz
Ambient operating temperature -40˚C to 40˚C
Drivers have greater than 90% power factor and less than 20% THD
LED drivers have output power over-voltage, overcurrent protection and short circuit protection with auto recovery
Field replaceable surge protection device provides 20kA protection meeting ANSI/ IEEE C62.41.2 Category C High and Surge Location Category C3; Automatically takes fixture off-line for protection when device is compromised
Dual Driver option provides 2 drivers within luminaire but only one set of leads exiting the luminaire, where Dual Power Feed provides two drivers which can be wired independently as two sets of leads are extended from the luminaire. Both options cannot be combined

CONTROLS

Photo control, occupancy sensor programmable controls, and Zigbee wireless controls available for complete on/off and dimming control
Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application
7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately)
0- 10V Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 6" standard
NX Lighting Controls available with in fixture wireless control module, features dimming and occupancy sensor
LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration
DLC (DesignLights Consortium Qualified), with some Premium Qualified configurations. Not all product variations listed in this document are DLC qualified.
Listed to UL1598 and CSA C22.2#250.0-24 for wet locations and 40˚C ambient temperatures
1.5 G rated for ANSI C136.31 high vibration applications
Fixture is IP65 rated
Meets IDA recommendations using 3K CCT configuration at 0 degrees of tilt
This product meets federal procurement law requirements under the Buy American Act (FAR 52.225-9) and Trade Agreements Act (FAR 52.225- 11).

WARRANTY

5 year warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Beacon > Area, Site and Roadway > VP Area Light