First Alert SC9120B 120V AC/DC Hardwired with 9V Battery Backup Ionization Smoke Alarm and Carbon Monoxide Combo Alarm (Upgraded to SMICO100-AC)

Home > BRANDS > BRK Electronics > BRK Electronics Smoke/Carbon Monoxide (CO) Alarm >

This item qualifies for California Carbon Monoxide CO law requirement. Please click here for details.

Our Price: $57.38

Model: FIRST-ALERT-SC9120B

Qty:

Technical Spec

Downloads

Technical Spec

Hardwired ionization/CO combination alarm meets new construction requirements.

Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies
Single button test/silence
9V Alkaline Battery Backup
Latching alarm indicator - remembers which unit initiated an alarm
Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm
End of Life Signal provides audible notification alarms needs to be replaced
Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms
Perfect Mount - allows for easy alignment of alarm
Dust Cover
Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective.
10-Years Limited Warranty

Model #	SC9120B
Weight	8.5 oz
Dimension	5.6" dia x 2.0"H
Operating Voltage	120V AC 60Hz pure sine wave w/9V battery backup
Operating Current	.09 amps (standby/alarm)
Temperature Range	40 degrees F (4 degrees C) to 100 degrees F (38 degrees C)
Humidity Range	10% to 95% relative humidity (RH)
Audio Alarm	85dB at 10 feet
Test/Silence	Electronically simulates a smoke or carbon monoxide condition, causing the unit to alarm.
Alarm Reset	Automatic when Smoke and/or CO clears. Press test/silence button to reset manually.
Interconnections	See User Manual
Smoke Sensor	Dual Ionization CO Sensor Metal Oxide
Indicator Lights/Sounds	AC Power: Constant Green LED DC Power: Intermittent Green LED Local Alarm: Red LED flashes rapidly Remote Alarm: Red LED out Latching Alarm: Red LED flashes every 5 seconds after local alarm stops
Listing	UL217 & UL 2034 Standards

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item: