Gotham EVO6PC 27/15 WD MVOLT GZ10 JBXCC PCAN S4 BR DBL 6" LED Pendant Stem Round Cylinder, 2700K, 1500 Lumens, Wide Distribution, 120-277V, 0-10V Dims to 10%, Integral Driver, Surface J-box, 5 Degrees Stem Canopy, 4' 5/8" Stem, Matte Black

Home > BRANDS > Gotham Lighting > Recessed Lighting > EVO > EVO6PC >

Alternative Views:

Our Price: $543.59

Usually Ships in 3-5 business days. Urgent Project? Contact Us.

Model: GOTHAM-EVO6PC-110890

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT FAMILY SPECIFICATIONS
Optical Assembly

Fully serviceable and upgradeable lensed LED light engine suitable for field maintenance or service from below the ceiling.
Optical design is a Bounding Ray™ design with 45° cutoff to source and source image. Top down flash characteristic for superior glare control.

Electrical
The luminaire shall operate from a 50 or 60 Hz ±3 Hz AC line over a voltage ranging from 120 VAC to 277 VAC. Support 347V via remote-mounted stepdown transformer. The fluctuations of line voltage shall have no visible effect on the luminous output.
The luminaire shall have a power factor of 90% or greater at all standard operating voltages and full luminaire output.
Sound Rated A+. Driver shall be >80% efficient at full load across all input voltages.
Input wires shall be 18AWG, 300V minimum solid copper.
All drivers are ROHS compliant.

Controls
Luminaire shall be equipped with interface for nLight wired or nLight AIR networks with integral power supply as per specification.

Emergency
Luminaires supplied with a battery pack comply with NFPA 101 (Life Safety code) and deliver constant light output throughout the 90 minutes of code required emergency operation period when there is a normal AC power loss.
Luminaires equipped with a generator transfer device work in conjunction with an auxiliary generator or a central inverter system to power fixtures for safe egress lighting.

Dimming
The luminaire shall be capable of continuous dimming without perceivable stroboscopic flicker as measured by flicker index (ANSI/IES RP-16-10) over a range of 100 – 10%, 100 – 1.0% or 100 – 0.1% of rated lumen output with a smooth shut off function to step to 0%.
eldoLED LED drivers shall conform to IEEE P1789 standards. Alternatively, manufacturers must demonstrate conformance with product literature and testing which demonstrates this performance. Systems that do not meet IEEE P1789 will not be considered.
Driver is inaudible in 24dB environment, and stable when input voltage conditions fluctuate over what is typically experienced in a commercial environment.

Construction
Heaving-gauge aluminum construction. Extruded cylinder body with flangeless reflector allows flow-through passive thermal management. Canopy matches cylinder in finish and diameter.
Pendant stem mount for installation to 4” recessed or surface octagonal junction box with integral driver.
Recessed gear box available for driver above ceiling, nLight, CP, GTD or battery pack options.
Surface gear box available for driver at ceiling installation.
Optional field configurable conduit covers available. Conduit covers match cylinder in finish and diameter.
WARNING: All pendant fixtures exposed to wind require tethering -- see page 6.

Listings
Fixtures are CSA Certified to meet US and Canadian Standards: All fixtures manufactured in strict accordance with the appropriate and current requirements of the "Standards for Safety" to UL, damp location standard; wet location (WL) optional, requires covered ceiling.
Luminaire configurations are Energy Star certified through testing in EPA–recognized laboratories, with the results reviewed by an independent, accredited certification organization. Visit www.energystar.gov for specific configurations listed. *Not all configurations are Energy Star listed.

Photometrics
LEDs tested to LM-80 standards. Measured by IESNA Standard LM-79-08 in an accredited lab. Lumen output shall not decrease by more than 30% over the minimum operational life of 60,000 hours.

Color appearance from luminaire to luminaire of the same type and in all configurations, shall be consistent both initially and at 60,000 hours and operate within a tolerance of <2.5 MacAdam ellipse as defined by the center of the quadrangles defined in ANSI C78.377-2015.

BUY AMERICAN ACT
This product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations.
Please refer to www.acuitybrands.com/buy-american for additional information.

Warranty
5-year limited warranty.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Gotham Lighting > Recessed Lighting > EVO > EVO6PC