Halo Recessed Commercial HC830D010 8" LED New Construction and Remodeler Housing, 3000 Lumens, 120-277V, 0-10V, 1-100% Dimming

Home > BRANDS > Halo Lighting > Halo Recessed Commercial > Halo Recessed 8" Commercial LED >

Alternative Views:

Our Price: $76.92

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-HC830D010

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Frame

Boat shaped galvanized steel plaster frame with adjustable plaster lip for 1/2" to 1-1/2" thick ceilings
May be installed in new construction; or from below the finished (non-accessible) ceiling in remodeling.
Provided with (2) old work clips to secure the frame to the ceiling when remodeling

Universal Mounting Bracket

Mounting bracket adjusts 2" vertically from above the ceiling or thru the aperture
Use with the included mounting bars or with 1/2" EMT (by others)
Removable to facilitate installation from below the finished ceiling

Mounting Bars

Captive preinstalled No Fuss mounting bars lock to tee grid with screwdriver or pliers
Centering mechanism allows for consistent positioning of fixtures
Accessory adjustable wood joist mounting bars option available to order separately (requires field replacement of No Fuss bars)

LED Module

Proximity phosphors over chip on board LEDs provide a uniform source with high efficiency and no pixilation
Available in 80 or 90 CRI minimum, provides accuracy within 3 SDCM color uniformity
90 CRI, R9>50 (refer to photometry section for colorimetric data)
Correlated Color Temperature options
- 2700K
- 3000K
- 3500K
- 4000K
Passive thermal management achieves L70 at 50,000 hours in IC and non IC applications (refer to compliance listings)
Integral diffuse lens provides visual shielding
Integral connector allows quick connection to housing flex

Lumen Options

Reflector

Self-flanged aluminum reflectors are available in narrow, medium or wide distribution patterns
Medium distribution non-conductive polymer matte white reflector for use in meeting 'dead front' applications
Wall wash reflector features a rotatable linear spread lens for precise alignment of vertical illumination.
Reflectors attach to LED module with (3) speed clamps
Multiple painted or plated finishes are available

Reflector / Module Retention

Reflector / module assembly is securely retained in the housing with (2) torsion springs

Driver

Field replaceable constant current driver
UNV 120-277VAC 50/60Hz input standard;
Continuous 1% - 100% dimming with 0-10V analog controls
Optional "DLV" low voltage DC driver for Cooper Lighting Solutions DLVP distributed low voltage system combines power and control

Canada Options

347VAC 50/60Hz; 1% dimming on 0 -10V analog control, for 1500, 2000, 3000, 4000 lumen models only
347V step down transformer factory installed with the standard “D010” 120V-277V, LED driver on 6000 and 8000 lumen models only

Emergency Option

Provides 90 minutes of standby lighting meeting most life safety codes for egress
Available with integral or remote charge indicator and test switch
Available Self-Test (self-diagnostic), with remote charge indicator and test switch

Connected Lighting Syste m Options

WaveLinx - Two WaveLinx options:
- Factory installed WaveLinx tile mount sensor kit
- Field installed WaveLinx accessory tile mount sensor kit.
The WTA WaveLinx tile mount sensor kit offers daylight dimming, PIR motion sensing control, and optional RLTS - Real Time Location Services available. (Refer to WaveLinx system specifications and application guides for details) The WTA WaveLinx kit includes control module that mounts on the luminaire electrical junction box via 1/2" knock-out, and tilemount sensor with directmount spring clips or for octagon ceiling box with included mounting bracket. (Field mount kit ordered and installed separately).
Enlighted wireless tile mount sensor and control kit

Junction Box

Galvanized steel junction box
20 in3 internal volume excluding voltage barrier
25 in3 internal total volume
Voltage divider for 0-10V dimming wires [occupies (1) 1/2" pry-out space]
Listed for (8) #12 AWG (four in, four out) 90 degree C conductors and feed-thru branch wiring
(3) 1/2" and (2) 3/4" trade size pry-outs available
(3) 4-port push wire nuts for mains voltage, with 1-port for fixture connection

Compliance

UL Certified (US and Canada), wet location listed in protected ceilings
IP20 - Above finished ceiling; IP65 - Below finished ceiling
Non-IC rated 4000, 6000, 8000 lumen models. Insulation must be kept 3" from top and sides.
IC rated 1500, 2000, 3000 lumen models are suitable for direct contact with air permeable insulation (also suitable for Non-IC)
Non-IC marked spacing required for 6000 and 8000 lumen models
- Marked Spacing Center to Center of Adjacent Luminaires = 36"
- Center of Luminaire to Building Member = 18"
- Minimum overhead = 0.5
Emergency battery backup options are Non-IC only.
Not for use in direct contact with spray foam insulation, consult NEMA LSD57-2013
Airtight per ASTM-E283-04
Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
EMI/RFI emissions FCC CFR Title 47 Part 15 Class A 277V & Class B 120V
Contains no mercury or lead and RoHS compliant
Photometric testing in accordance with IES LM-79-08
Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
1500 lumen 90CRI IC rated model may be used to comply with State of California Title 24 residential code, per JA8 certification standards
May be used to comply with State of California Title 24 non-residential code, in Non-IC, as a dimmable LED luminaire
ENERGY STAR certified, refer to certified light fixtures database

Warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item: