Halo Recessed HL36A15930ED010ICAT 3" Round Shallow Directional IC New Construction LED Housing, 15W, No Optic, 90 CRI, 3000K Color Temperature, 120V Phase Cut 1% Dimming, 120-277V 0-10V 1% Dimming

Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 3 Inch LED Integrated Recessed Lighting > Halo 3 Inch LED Integrated Recessed Housings > Halo HL36A Round Shallow Directional Housing, No Optics >

Alternative Views:

Our Price: $175.35

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-HL36A15930ED010ICAT

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Frame

Galvanized steel plaster frame with integral bar hanger receivers
Setscrew provide positive horizontal locking
Collar adjusts vertically to accommodate 1/2" to 7/8" thick ceilings and locks in position with (4) screws
Use optional collar extender for 7/8" to 1-1/4" thick ceilings
Integral gun sights facilitate the use of guide strings or laser lines
Shipped with overspray protector installed

Housing

Steel housing painted matte black for a visually dark interior
Removable top allows service from above

Bar Hangers

GOT NAIL! Gen 3 bar hangers adjust from 10-1/2" to 24" wide
Captive nail penetrates standard and engineered lumber
Mounting flange levels platform with ceiling
Integral clip attaches directly to tee-bar

Gaskets

Gaskets achieve restrictive airflow requirements without additional caulking

Adjustment Mechanism

Rotates 365 degree , tilts 45 degree and locks in position maintaining any aiming angle
Angle markings assist in repeatable settings
Translating center beam optics aligns axis of primary reflector with aperture from nadir to 45 degree

Trim Retention

Attached by (8) rare earth Neodymium magnets, holds trim securely to the ceiling
Tether secures trim to housing during service or adjustment

LED Module

LED array is field replaceable
Proximity phosphors over chip on board LEDs provide a uniform source with high efficiency and no pixilation
Color accuracy within 3 SDCM and 90 CRI minimum
Passive cooling achieves L70 at 50,000 hours

Primary Optic

Precision molded TIR optics deliver highly efficient and uniform patterns
Various patterns are available and can be interchanged without tools

Media

Integral media holder accepts up to (2) 2" diameter 3.0mm thick color filters or lens
Order color filters and lens separately

Trims

Die cast aluminum trims are available in open, lens and lens wall wash styles
Polymer non-conductive trim meets many local code requirements for â€˜dead frontâ€™
Physical and optical cutoff provides visual comfort
Light trap eliminates spill light with flange
Available in self-flanged or rimless styles with optional rimless adapter

Shielding

Micro-prismatic lens standard with lens trims
Hinged to allow rimless trim removal

Driver

Field replaceable constant current driver provides noise free operation
UNV 120-277VAC 50/60Hz input
Continuous, flicker-free 1% dimming, available with LE and TE phase cut (at 120V only) and 0-10V analog control

Junction Box

Galvanized steel junction box with 18in3 internal volume
Listed for (12) #12 AWG 90 degree C splice conductors
(7) 1/2" conduit pry-outs positioned to allow straight conduit runs
(3) Slide-N-Side non-metallic (NM) wire traps
Accepts 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian NM cable
(3) 4-port push wire nuts mains voltage connections

Compliance

Type IC inherently protected, suitable for direct contact to air permeable insulation and cULus listed for damp locations
Not for use in direct contact with spray foam insulation, consult NEMA LSD57-2013
Wet location listed in covered ceilings. Housing is IP20 certified and when installed with a lens trim IP55 certified below the ceiling in covered ceiling applications only
Airtight per ASTM-E283-04
Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
Contains no mercury or lead and RoHS compliant
Photometric testing in accordance with IES LM-79-08
Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
Can be used for State of California Title 24 high efficacy LED compliance under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2016 JA8 High Efficacy Lighting
ENERGY STAR certified, reference certified light fixtures database

Warranty

Five year limited warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 3 Inch LED Integrated Recessed Lighting > Halo 3 Inch LED Integrated Recessed Housings > Halo HL36A Round Shallow Directional Housing, No Optics