Halo Recessed HL36AR20FL930ED010TAT 3" Round Shallow Directional Remodeler Housing, 20W, Flood Distribution, 90 CRI, 3000K Color Temperature, 120-277V, Cut 1% Dimming, 0-10V 1% Dimming, Thermally Protected and Airtight

Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 3 Inch LED Integrated Recessed Lighting > Halo 3 Inch LED Integrated Recessed Housings > Halo HL36A Round Shallow Directional Housing with Optics >

Alternative Views:

Our Price: $218.34

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-HL36AR20FL930ED010TAT

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Module

Module installs from below with the adjustment mechanism aimed at nadir and allows housing to be articulated
Module can be removed for service or splice inspection

Mounting Clamps

Integral mounting clamps tighten from below using a #2 Philips screwdriver and accommodate 1/2" to 1-1/4" thick ceilings

Adjustment Mechanism

Rotates 360 degrees, tilts 35 degrees and locks in position maintaining any aiming angle
Angle markings assist in repeatable settings
Translating center beam optics aligns axis of primary reflector with aperture from nadir to 35 degrees

LED

Proximity phosphors over chip on board LEDs provide a uniform source with high efficiency and no pixilation
Fixed 2700K, 3000K, 3500K and 4000K CCT color temperatures, Color accuracy within 3 SDCM and 90 CRI minimum
Passive cooling achieves L70 at 50,000 hours

Primary Optic

Precision molded optics deliver highly efficient and uniform patterns
Various patterns are available and can be interchanged without tools

Media

Integral media holder accepts up to (2) 2" diameter 3.0mm thick color filters or lens

Driver

Constant current driver provides noise free operation
UNV 120-277VAC 50/60Hz input
Continuous, flicker-free 1% dimming, available with LE/TE phase cut (at 120V only) and 0-10V analog control

Remote Junction Box / Driver Housing

Galvanized steel junction box / driver housing with 18 in3 internal volume
Listed for (12) #12 AWG 90 degrees C splice conductors
(2) 1/2" conduit pry-outs positioned to allow straight conduit runs
(2) Slide-N-Side non-metallic (NM) wire traps
Accepts 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian NM cable
(3) 4-port push wire nuts mains voltage connections

Compliance

Type IC inherently protected (13W only), suitable for direct contact to air permeable insulation and cULus listed for damp locations
Not for use in direct contact with spray foam insulation, consult NEMA LSD57-2013
Wet location listed in covered ceilings and IP65 certified with select trims
Airtight per ASTM-E283-04
Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
Contains no mercury or lead and RoHS compliant
Photometric testing in accordance with IES LM-79-08
Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
Can be used for State of California Title 24 high efficacy LED compliance under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2016 JA8 High Efficacy Lighting
ENERGY STAR certified, reference certified light fixtures database

Warranty

Five year limited warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 3 Inch LED Integrated Recessed Lighting > Halo 3 Inch LED Integrated Recessed Housings > Halo HL36A Round Shallow Directional Housing with Optics