Halo Recessed HLA305FL9271EMWR 3" Round LED Directional Downlight with Remote Driver/ Junction Box, 500 Lumens, 40 Degree Flood Distribution, 90 CRI, 2700K, 120V, LE & TE Phase Cut 5% Dimming, Matte White Flange Finish

Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 3 Inch LED Integrated Recessed Lighting > Halo HLA3 3 Inch LED Directional Downlight >

Alternative Views:

Our Price: $19.99

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-HLA305FL9271EMWR

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Housing

Die cast aluminum mounting frame with round or square flange
Gimbal rotates 360 degree and tilts +/- 30 degree holding any aiming angle
Aluminum heat sink provides passive thermal cooling achieving L70 at 50,000 hours in IC and non-IC applications

Gasket

Closed cell gasket achieves restrictive airflow and wet location listing without additional gaskets or caulking

Optional Mounting Frame

Pre-galvanized steel mounting frame locates fixture fittings during electrical rough in and provides cutout guidance for drywall contractor
Provides tool-less attachment of remote driver / junction box

Optics

Flood - FL
Optical design creates a clean, uniform 40-degree beam distribution

LED Array

Plurality of mid power LED’s provides a uniform source with high efficiency and long life
Available in 90 CRI minimum, R9 greater than 50 provides high color rendering
Dedicated color temperature, select 2700K or 3000K CCT, color accuracy within 4 SDCM
Meets ENERGY STAR color angular uniformity requirements, deviation is less than 0.006 u' v'

Remote Driver / Junction Box

Pre-galvanized steel driver / junction box with captive hinged junction box cover
Listed for (6) #12 AWG 90 degree C splice conductors, 2-in, 2-out plus (2) ground
(2) ½" conduit pry-outs
(2) Slide-N-Side non-metallic (NM) wire traps allows wiring outside the box
Accepts 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian NM cable
(3) 4-port push wire nuts with clear caps for quick and reliable mains voltage connections
Integral mounting slots facilitate direct mounting to building structure or mounting frame

Driver

120V 60 Hz constant current driver provides noise free operation
Continuous, flicker-free dimming from 100% to 5% with select leading or trailing edge 120V phase cut dimmers
Plenum rated inline electrical quick connect provides low voltage connection to fixture fitting

Installation

Can be installed in 1/2" to 1-1/4" thick ceilings in as little as 3-1/2” plenum height
Cutout utilizes standard round hole saw sizes, cutout template provided
Heat treated springs hold fixture fitting securely in the ceiling eliminating light leaks
Can be removed from below the ceiling for service or replacement

Compliance

cULus certified type IC suitable for direct contact with air permeable insulation
Not recommended for use in direct contact with spray foam insulation, reference NEMA LSD57-2013
Wet location listed and IP44 ingress protection
Airtight per ASTM-E283-04
Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
Contains no mercury or lead and RoHS compliant
Photometric testing in accordance with IES LM-79-08
Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
Can be used for State of California Title 24 high efficacy LED compliance under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2016 JA8 High Efficacy Lighting
ENERGY STAR certified, reference "Certified Light Fixtures" database

Warranty

Five year warranty standard.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 3 Inch LED Integrated Recessed Lighting > Halo HLA3 3 Inch LED Directional Downlight