Request a Quote

  Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 4 Inch LED Integrated Recessed Lighting > Halo ML4DM LED Recessed Downlight Series >

Halo Recessed ML4DM10LSFL9FS1E 4" Canless LED Downlight, Direct Mount, Selectable 600, 800, 1000 Lumens, 5CCT Selectable, 90 CRI40 Degree Optic, 120V, LE/TE 5% Dim
Halo Recessed ML4DM10LSFL9FS1E 4" Canless LED Downlight, Direct Mount, Selectable 600, 800, 1000 Lumens, 5CCT Selectable, 90 CRI40 Degree Optic, 120V, LE/TE 5% Dim
 
Our Price: $56.95
Request Large Quantity Quote


Usually Ships in 4-6 business days. Urgent Project? Contact Us.




Model: HALO-ML4DM10LSFL9FS1E
Qty:

Technical Spec Downloads
 
Technical Spec
PRODUCT SPECIFICATIONS
Housing
  • Die cast aluminum housing provides passive thermal cooling achieving L70 at 50,000 hours in IC and non-IC applications
  • Retention springs holds housing securely in 3/8" to 1-1/2" thick ceilings, can be removed for service or replacement
  • Not suitable for 2x4 framing
Optional Mounting Frame
  • Pre-galvanized steel mounting frame locates fixture fittings during electrical rough-in and provides cutout guidance for drywall contractor
  • Provides attachment of remote driver / junction box
LED Array
  • Proximity phosphors over chip on board LEDs provide a uniform source with high efficiency and no pixilation
  • Available in 90 CRI minimum, R9 greater than 50 and color accuracy within 3 SDCM at end points and 4 SDCM in the middle providing color accuracy and uniformity
VividTune
  • Field selectable 2700, 3000, 3500, 4000 or 5000K CCT, factory set at 3000K CCT
  • Optional full spectrum color, 95 CRI minimum with R1-R15 values ranging from 92 to 100, excellent TM-30 metrics; Rf ranging from 96-98 and Rg >98
  • Field selectable 600, 800 and 1000 lumens
VividTune
  • D2W dim-to-warm option shifts color temperature from 3000 to 1800 K CCT or 2700 to 1800 K CCT as fixture dims mimicking the black body dimming response of halogen or incandescent lamps
Primary Optic
  • Precision molded TIR optic organizes source flux into useful beams without stray lumens in the field
  • Low glare, UGR < 17
  • Two-piece construction with matte black mounting ring and polarized turn and lock mounting aligns optic to source and minimizes backlight in the housing
  • Meets ENERGY STAR color angular uniformity requirements, color deviation is typically less than 0.004 u' v'
  • Available in narrow flood, flood, wide flood and asymmetric wall wash distributions, ships with flood optic factory installed, order alternate distributions or replacements separately
Media
  • Order media separately
  • Integral media holder accepts (2) lens or louver 2" diameter 3.0mm thick color filters, lens or louvers
Driver
  • Integral 120V 60 Hz constant current driver provides noise free operation
  • Continuous, flicker-free dimming from 100% to 5% with select leading or trailing edge 120V phase cut control
  • Optional UNV 120-277V 50/60 Hz driver with 0-10V analog dimming from 100% to 5%
Remote Driver / Junction Box
  • Pre-galvanized steel driver/junction box with captive hinged junction box cover
  • Listed for six #12 AWG 90 degrees C splice conductors, two in, two out plus ground
  • Two 1/2" conduit pry-outs
  • Two Slide-N-Side non-metallic (NM) wire traps allow wiring outside the box
  • Accepts NM cable types: 14-2, 14-3, 12-2, 12-3 (U.S.) and 14-2, 14-3, 12-2 (Canadian)
  • Three 4-port push wire nuts with clear caps for quick and reliable mains voltage connections
  • Integral mounting holes facilitate direct mounting to building structure or mounting frame
Compliance
  • UL Certified US and Canada
  • Damp and wet location listed, covered ceilings only and IP65, below the ceiling only with lens trims
  • Airtight per ASTM-E283
  • Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
  • EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
  • Contains no mercury or lead and RoHS compliant
  • Photometric testing in accordance with IES LM-79-08
  • Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
  • ENERGY STAR certified, reference Certified Light Fixtures database
  • Can be used for State of California Title 24 high efficacy LED compliance under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2019 JA8 High Efficacy Lighting
Warranty
  • Five-year limited warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 4 Inch LED Integrated Recessed Lighting > Halo ML4DM LED Recessed Downlight Series
We Our Customers!

Thanks for shopping with us today

Click here to get a promo code for 10% off your next order

How can we help you?
Live Chat