Halo Recessed SLD6129SE010MWR 6" Surface LED Downlight, Selectable CCT 2700K-5000K, 120-277V, 1200 Lumens, 15W

Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Retrofit Recessed Lighting > Halo SLD6 LED Retrofit Surface Light Kits >

Our Price: $36.91

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-SLD6129SE010MWR

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Construction

Optics

Light guide provides uniform luminance from a low profile flat lens
AccuAim optics provide directional control for the "cone-of-light" beam distribution of a traditional downlight
Precision molded lens features high transmission polymer with UV stabilized protecting film

Designer Trims
Accessories (sold separately)

SLD designer trims are accessory rings that attach to the SLD for a permanent finish. Refer to SLD accessories specification sheet for details.
- White (Paintable)
- Satin Nickel
- Tuscan Bronze

Electrical Junction Box Mounting

SLD may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation
Suitable for installation in 3-1/2" and 4" square, octagon, and round electrical junction boxes (some require SLD6EXT)
Installer must ensure compatibility of fit, wiring and proper mounting in the electrical junction box. This includes all applicable national and local electrical and building codes
Proprietary Slot-N-Lock quick installation system for junction box installation
T-bracket with Slot-N-Lock mounting tabs included.

LED

Trilateral linear LED assembly is integrated in trim perimeter.
Field selectable color temperature; select 2700K, 3000K, 3500K, 4000K or 5000K CCT
90 CRI can be used for California Title 24 compliance/certified
L70 at 50,000 hours projected in accordance with TM-21

LED Chromaticity

A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED
LED chromaticity of 3 SDCM exceeds ENERGY STAR color standards per ANSI.
90 CRI model features high color performance with R9 greater than 50
Every Halo LED is quality tested, measured, and serialized in a permanent record to register lumens, wattage, CRI and CCT.
Halo LED serialized testing and measurement ensures color and lumen consistency on a per-unit basis, and validates long-term product consistency over time.

Electrical Connections
Junction Box

Compatible with many 3-1/2" x 2" and 4" x 1-1/2" round and octagon boxes (2-1/8" deep boxes recommended)
Supply Wire Adapter with LED quick connector included
For recessed housings use SLDACCKIT (sold separately)

LED Driver

Driver is a 120V input high efficiency, dimmable electronic power supply providing DC power to the

LED array

Driver features high power factor, low THD, and has integral thermal protection in the event of over temperature or internal failure.
Driver is replaceable if it should be required 120V Dimming -- Phase Control
Designed for continuous dimming capability to nominally 5% with many 120V Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
Dimming to 5% is best assured using dimmers with low end trim adjustment.
Consult dimmer manufacturer for compatibility and conditions of use.
Note: Some dimmers require a neutral in the wallbox.

UNV Dimming -- 0-10V

120V-277V UNV dimming capability to nominally 5% with 0-10V control dimmers only .
0-10V DC dimmers operate using two low voltage dimming wires (color coded violet and gray). The low voltage dimming wires are separate from the 120V AC or 277V AC power.
Switching on/off is controlled via the line voltage (120V AC or 277V AC) power, and dimming is controlled via the 2-wire 0-10V DC low voltage wiring.
UNV SLD does not phase dim, only 0-10V.

Compliance

UL Certified for use in US and Canada
UL Certified Damp and Wet location listed.
Suitable for use in closets, compliant with NFPA 70, NEC Section 410.16 (A)(3) and 410.16 (C)(5)
SLD may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation
May be installed in IC recessed housings in direct contact with insulation (Not for use in recessed housings in direct contact with spray foam insulation. Refer to NEMA LSD 57-2013)
UL Classified when used in retrofit with listed housings (See Housing Compatibility)
EMI/RFI: meets FCC 47CFR Part 15 Class B limits, and is suitable for use in residential and commercial installations
Airtight certified per ASTM E283 (not exceeding 2.0 CFM under 57 Pascals pressure difference)
90 CRI: Can be used to comply with California Title 24 High Efficacy requirements. Can be used for International Energy Conservation Code (IECC) and Washington State Energy Code high efficiency luminaire compliance
ENERGY STAR certified luminaire - consult ENERGY STAR Certified Product List
Contains no mercury or lead and RoHS compliant.
Photometric testing in accordance with IES LM-79
Lumen maintenance projections in accordance with IES LM-80 and TM-21

Warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item: