Hubbell Outdoor Lighting ASL1-160L-100-3K7-4F-UNV-A Sling Microstrike, 12000 Lumens, 3000K, 70 CRI, Type 4F Distribution, 120-277V, Arm for Square Poles with S2 Drill Pattern

Home > BRANDS > Hubbell Outdoor Lighting > Hubbell Outdoor Lighting Area / Site > ASL Medium Size Area/Site Fixtures >

Alternative Views:

Our Price: $568.51

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HUBBELL-ASL1-227

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
CONSTRUCTION

Die-cast housing with hidden vertical heat fins that are optimal for heat dissipation while keeping a clean smooth outer surfac
Corrosion resistant, die-cast aluminum housing with powder coat paint finis
Separate optical and electrical compartment for improved thermal management and optimum component operatio
TGIC thermoset polyester powder paint finish applied at nominal 2.5 mil thickness

OPTICS

Entire optical aperture illuminates to create a larger luminous surface area resulting in a low glare appearance without sacrificing optical performance
Premium engineered individual acrylic lenses deliver IES Type 2, 3, 4F, 4W and 5QW distributions
Lens distributions are field rotatable (in 90˚ increments) or exchangeable for job site fine-tuning
3000K, 4000K or 5000K (70 CRI) CCT
80, 160 or 320 midpower LEDs
3000K, 4000K or 5000K (70 CRI) CCT
Zero uplight at 0 degrees of tilt
Field rotatable optics

INSTALLATION

Tool-less entry to wiring/driver compartment optional
Arm mounting works with S2 drill pattern
Fixture ships with square mounting block for ease of installation
Mast arm fitter accessory or option available for 2-3/8” OD brackets with vertical tilt of +3°, 0° or -3°

ELECTRICAL

Universal 120-277 VAC or 347-480 VAC input voltage, 50/60 Hz
Ambient operating temperature -40˚ C to 40˚ C
Drivers have greater than 90% power factor and less than 20% THD
LED drivers have output power over-voltage, over-current protection and short circuit protection with auto recovery
Standard 6kV surge protection with optional field replaceable surge protection device provides 20KA and 10KV protection meeting ANSI/IEEE C62.41.2 Category C High and Surge Location Category C3; Automatically takes fixture off-line for protection when device is consumed

CONTROLS

Photo control, occupancy sensor and Zigbee wireless available for complete on/off and dimming control
7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately)
Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 6
Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application

CERTIFICATIONS

Listed to UL1598 and CSA C22.2#250.0-24 for wet locations and 40˚C ambient temperatures
DLC (DesignLights Consortium Qualified), with some Premium Qualified configurations.
Not all product variations on this page are DLC Qualified. Refer to http://www.designlights.org/ for the most up-to-date list.
1.5G rated for ANSI C136.31 high vibration applications
IP65 optical assembly
Meets IDA recommendations using 3K CCT configuration at 0 degrees of tilt
This product meets federal procurement law requirements under the Buy American Act (FAR 52.225-9) and Trade Agreements Act (FAR 52.225-11). See Buy America(n) Solutions (link to https://www.currentlighting.com/resources/america-solutions)

WARRANTY

5 Year warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Hubbell Outdoor Lighting > Hubbell Outdoor Lighting Area / Site > ASL Medium Size Area/Site Fixtures