Technical Spec
The Juno IC22LED G4 6-inch downlight features a dedicated LED, new construction housing with integral light engine designed to provide 50,000 hours of life and be compatible with many standard Juno trims. The IC-rated fixture�s shallow housing can fit in a 2 x 6 construction and can be completely covered with insulation. The fixture is Air-Loc� sealed to stop infiltration and exfiltration of air, reducing heating and cooling costs.
- ENERGY STAR� Qualified and certified to high efficacy requirements of California T24 when used with select trims. See specification sheet for details.
- 2700K, 3000K, 3500K or 4100K color temperatures available, 90 CRI minimum
- Over 900 lumens with select trims using fewer than 16W; nominal input wattage at 120V operation with dedicated 120V driver under stable operating conditions
- LEDS binned within a three step MacAdam Ellipse exceeding ENERGY STAR� requirements for superior fixture to fixture uniformity
- Computer-optimized reflector design with high-reflectance finish and a high-transmission diffusing lens conceals LEDs and produces uniform aperture luminance
- Dedicated 120V driver, dimmable with forward or reverse phase, or universal voltage driver, 0-10V dimmer, for input voltages from 120-277V AC at 50-60Hz
- Fully sealed Air-Loc� housing degrees
- Real Nail� 3 bar hangers telescope with removable nail, breakaway bars, Quick-Loc slot, oversized set screw, and curved foot; can reposition bars 90 degrees
- Shallow housing allows for fit in 2 x 6 construction
LED Light Engine
|
- LED array integrated to thermally conductive housing provides uninterrupted heat transfer to ensure long life of the LED
- Replaceable light engine mounts directly to housing and incorporates the latest generation, high lumen output LED array
- LEDs are binned within a 3-step MacAdam Ellipse exceeding ENERGY STAR� requirements for superior fixture to fixture color uniformity
- 2700K, 3000K, 3500K, or 4100K color temperatures available
- 90 CRI minimum.
|
Optical System
|
-
Computer-optimized reflector design with high reflectance white finish coupled with a high transmission diffusing lens conceals the LEDs and produces uniform aperture luminance
- Deep regression of lens produces a low glare, efficient system that produces 900 lumens typical with select trims
- Wide flood distribution shipped as standard with optional optic accessories available and sold separately.
|
Aesthetic Trim Selections
|
Compatible with wide selection of existing Juno trims.
Shadow free, knife edge design blends seamlessly into ceiling.
|
LED Driver
|
- Choice of dedicated 120 volt driver or universal voltage driver that accommodates input voltages from 120-277 volts AC at 50/60Hz
- Power factor > 0.9 at 120V input
- 120 volt only driver is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers
- Universal voltage driver is dimmable with the use of most 0-10V wall box dimmers
- Mounted between the j-box and housing for easy access and cool operation.
|
Life
|
Rated for 50,000 hours at 70% lumen maintenance.
|
Labels
|
-
ENERGY STAR� Qualified when used with select baffle and cone trims
- Certified to the high efficacy requirements of California T24 with select trims
- UL listed for U.S. and Canada through-branch wiring, damp locations
- Union made
- UL and cUL.
|
Housing
|
Designed for use in IC (insulated ceiling) or non-IC construction.
Aluminum housing sealed for Air-Loc� compliance. Housing is vertically adjustable to accommodate up to a 2� ceiling thickness.
|
Junction Box
|
Pre-wired junction box provided with (5) 1?2� and (1) 3?4� knockouts, (4) knockouts for 12/2 or 14/2 NM cable and ground wire.
UL listed and cUL listed for through-branch wiring, maximum 8 #12 branch circuit conductors. Junction box provided with removable access plates. Knockouts equipped with pryout slots. Quick connect electrical connectors supplied as standard for fast, secure installation.
|
Mounting Frame
|
22-gauge die-formed galvanized steel mounting frame.
Rough-in section (junction box, mounting frame, housing and bar hangers) fully assembled for ease of installation.
|
Real Nail 3 Bar Hangers
|
Telescoping Real Nail 3� system permits quick placement of housing anywhere within 24� O.C. joists or suspended ceilings.
Includes removable nail for repositioning of fixture in wood joist construction. Integral T-bar notch and clip for suspended ceilings.
|
|