The true power of LED is on display with the High Lumen Area (HLA) from Lithonia Lighting. Through the use of our patented hybrid silicone optics, the HLA effectively harnesses the powerful LED source, creating high levels of illumination.

With over 60,000 delivered lumens, the HLA is a no-compromise 1000W metal halide replacement with the long life and energy savings of LED. A special Type 1S optic makes the HLA an outstanding choice for the front row of automotive dealerships, providing the high volumes of light required to make the inventory shine.

The High Lumen LED Area Luminaire’s die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. The LED drivers are mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environment contaminants (IP66). Low EPA 2.3 ft2 (0.21 m2) for optimized wind loading.

Silicone hybrid optics are engineered for superior field-to-beam ratios, uniformity, and spacing. Light engines are available in 3000 K (70 CRI min.), 4000 K (70 CRI min.) and 5000 K (70 CRI min.) configurations.

Light engines consist of chip-on-board (COB) LEDs directly coupled to the housing to maximize heat dissipation and promote long life (100,000 hrs at 25°C, L83). Class 1 electronic driver has a power factor >90%, THD <20%, and has an expected life of 100,000 hours with <1% failure rate. Easily-serviceable surge protection device meets a minimum Category C low operation per ANSI/IEEE C62.41.2.

Included mounting block and integral arm facilitate quick and easy installation. Stainless steel bolts fasten the mounting block securely to poles and walls, enabling the High Lumen LED Area Luminaire to withstand up to 2G vibration load rating per ANSCI C136.31. The High Lumen Area Luminaire utilizes AERISTM series pole drilling pattern (Template #8). NEMA photocontrol receptacle is available.

CSA certified to U.S. and Canadian standards. IP 66 rated for outdoor applications. Rated for -40°C minimum ambient conditions.