|
Technical Spec
PRODUCT SPECIFICATIONS INTENDED USE -- Suitable for architectural applications where aesthetics and superior performance
are required.
CONSTRUCTION -- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate
visible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.
Standard housing finish is brushed aluminum.
Precision-molded, textured letters – 6" high with 3/4" stroke, with 100 ft viewing distance rating, based
upon UL924 standard. Chevron indicator direction must be specified.
Recessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum
housing trim mounts flush onto wall or ceiling.
Mounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.
OPTICS -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.
Low energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V
single-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V
single-face green sign.
ELECTRICAL -- Dual voltage input capability (120/277V).
Sealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current
series charger, 24-hour recharge after 90-minute discharge.
Polarized battery connector simplifies installation and maintenance; prevents charger damage due to
improper connection.
INSTALLATION -- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum
wall or ceiling opening 13-5/8" L x 4-1/2" W x 3-1/8" D.
Adjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed
openings. Trim ring has 3/4" variable depth adjustment to ensure flush fit against surface of wall or ceiling.
Plug-in wire connections and self-captive mounting screws for mounting panel/trim to rough-in section.
Top Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.
LISTINGS -- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,
FCC TPRODUCT SPECIFICATIONS INTENDED USE -- Suitable for architectural applications where aesthetics and superior performance
are required.
CONSTRUCTION -- High-polish, injection-molded virgin acrylic panel, ultrasonically welded to eliminate
visible hardware. Graduated depth of molded letters provides uniform light distribution on graphics.
Standard housing finish is brushed aluminum.
Precision-molded, textured letters – 6" high with 3/4" stroke, with 100 ft viewing distance rating, based
upon UL924 standard. Chevron indicator direction must be specified.
Recessed rough-in section constructed of 20-gauge, die-formed galvanized steel. Extruded aluminum
housing trim mounts flush onto wall or ceiling.
Mounting canopy for top mount is constructed of extruded aluminum housing to match housing finish.
OPTICS -- LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.
Low energy consumption – EL N operation: only 2.3W for 120V single-face red sign; 1.7W for 120V
single-face green sign. Non-emergency operation: only 1.5W for 120V single-face red sign; 1.2W for 120V
single-face green sign.
ELECTRICAL -- Dual voltage input capability (120/277V).
Sealed, maintenance-free nickel cadmium battery delivers 90 minutes capacity to lamp. Constant-current
series charger, 24-hour recharge after 90-minute discharge.
Polarized battery connector simplifies installation and maintenance; prevents charger damage due to
improper connection.
INSTALLATION -- Recessed mount - rough-in section for back, ceiling or end mounting. Fits into minimum
wall or ceiling opening 13-5/8" L x 4-1/2" W x 3-1/8" D.
Adjustable T-bar hangers adapt mounting tray for mounting in suspended ceilings or variable-size framed
openings. Trim ring has 3/4" variable depth adjustment to ensure flush fit against surface of wall or ceiling.
Plug-in wire connections and self-captive mounting screws for mounting panel/trim to rough-in section.
Top Mount (TM) – low-profile mounting canopy attaches exit to J-box. No rough-in section required.
LISTINGS -- UL listed. Non-IC recessed mounting. Meets UL 924, NFPA 101 (current Life Safety Code), NEC,
FCC Title 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for
less than 20W energy consumption.
WARRANTY -- 5-year limited warranty
itle 47, Part 15, Subpart B and OSHA illumination standards, and State of Minnesota requirements for
less than 20W energy consumption.
WARRANTY -- 5-year limited warranty
|
|
|