|
Technical Spec
PRODUCT FAMILY SPECIFICATIONS INTENDED USE -- Suitable for wet location (4X option), security/prisons and high-abuse applications. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.CONSTRUCTION -- The housing is .25" to .525" thick rugged, low-profile cast aluminum. Clear, UV-stable polycarbonate cover is .130" thick to prevent cracking or breaking. Cover is secured with four stainless steel, Torx T20 tamper-resistant screws with center pin. Cover is secured with four stainless steel, phillips, head screws with the FPA option. .1" thick polycarbonate faceplate incorporates universal directional chevron knockouts that are concealed and easily removed and replaced. Universal mount (UM) option available – top, back, end mounting or conduit entry (canopy provided). Letters 6" high with 3/4" stroke, with 100 ft viewing distance rating, based upon UL924 standards. U.S. Patent No. 5,611,163 and D383,501.
OPTICS -- Lamp is constructed using new LED technology. Provides perfectly uniform illumination. The typical life of the exit LED lamp is 5 years, based on 24/7 operation. Single-face exit uses one LED lamp; double-face exit uses two LED lamps. Low energy consumption -- red lamp consumes 2.3W (120V); green lamp consumes 1.7W (120V).
ELECTRICAL -- Dual voltage input capability (120/277V). Sealed, maintenance-free nickel-cadmium battery delivers 90 minutes capacity to lamp. Constant-current series charger, automatic recharge after battery discharge.Vandal-resistant magnetic test switch (magnet included) and LED indicator mounted on bottom of housing provide a safe, easy means for testing. Manual test switch also provided inside housing. Polarized battery connector simplifies installation and maintenance; prevents charger damage from improper connection. Brownout protection. Low voltage disconnect allows battery connection before AC power is applied and prevents battery damage from deep discharge. Self-diagnostics (optional). Automatically tests once a month for five minutes and once every six months for 30 minutes. Bi-color LED status indicator, test and service required. INSTALLATION -- Back mount standard for single face (no canopy), unless universal mount (UM) specified. Conduit entry (1/2" - 14 UNC) included with universal mounting. Cast-aluminum canopy attaches to 10-gauge steel mounting plate for top or end mounting (not required for back mounting). Canopy mounting bracket provides 160 lbs. of mounting strength when mounted to suitable structure. Bracket will only fit a 2-gang junction box.
LISTINGS -- UL Listed. 4X option is UL 924 wet location listed and UL listed to NEMA 4X ratings. NSF certified (FPA option). Meets UL 924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination standards, and State of Minnesota energy-efficient legislation requiring less than 20W consumption. Suitable for ambient temperatures 10°C (50°F) to 40°C (104°F). Meets all applicable FCC Title 47, Part 15, Subpart B requirements.
GOVERNMENT PROCUREMENT BAA - Product with the BAA option qualifies as a domestic end product under the Buy American Act as implemented in the FAR and DFARS. Product with the BAA option also qualifies as manufactured in the United States under DOT Buy America regulations. BABA - Build America Buy America: Product with the BAA option also qualifies as produced in the United States under the definitions of the Build America, Buy America Act.
WARRANTY -- 5-year limited warranty
|
|
|