Lithonia WF4 REG SWW5 90CRI MW M6 4" Wafer-Thin Housing-Free LED Downlight, Switchable 2700K-5000K, 90 CRI, Matte White

Home > BRANDS > Lithonia Lighting > Lithonia Recessed Lighting > Lithonia WF Series Switchable Color Temperature Wafer LED Downlight >

Alternative Views:

Our Price: $26.45

Usually Ships in 3-5 business days. Urgent Project? Contact Us.

Model: LITHONIA-WF4-LED-1069664

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT DESCRIPTION
The 4" regressed round baffle with 5CCT Switchable White technology provides high-quality light output and efficiency featuring a switch for easy color temperature adjustment to choose between 2700K, 3000K, 3500K, 4000K, or 5000K - while eliminating the need for recessed housings.

Regressed lens and baffle trim design to reduce glare for comfortable and even illumination
Canless - no can required; equals easy to install and less labor
5 selectable color temperatures to chose with a switch ranging from warm (2700K) to daylight (5000K) allowing customization for endless applications

PRODUCT SPECIFICATIONS
Housing

Die cast aluminum mounting frame with integral polycarbonate flange provides passive thermal cooling achieving L70 at 50,000 hours
Lens regressed to .5" with baffle trim design to reduce glare for comfortable and even illumination
FT4 3-pin plenum rated cable connector to connect from module to remote driver box
Steel spring clip for easy installation
4" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 4 1/4 inches for this product
Can be installed from 3/8" to 1 1/2" ceiling thickness
Can be removed from below the ceiling for service or replacement.

LED Light Engine

LEDs are integrated to one piece high purity aluminum, thermally conductive housing to provide uninterrupted heat transfer to ensure long life of the LED
Switchable white color temperature from 2700K, 3000K, 3500K, 4000K, 5000K
90 CRI minimum
Color accuracy within 4 step McAdams Ellipse at the end CCT (2700K and 5000K), within 6 step McAdams Ellipse in the middle CCT (3000K, 3500K, and 4000K)
Dimming 100% to 10% with most standard incandescent dimers (see list of approved dimmers).

Driver

Connect directly to 120V Class-2 (CAN ICES-005 (B) / NMB-005 (B))LED driver. 120V 60 Hz constant current driver provides noise free operation
IC rated driver with convenience of a switch to choose between 5 selectable color temperature options ranging from 2700K (warm white), 3000K, 3500K, 3000K, 4000K, or 5000K (daylight)
The isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6) 14 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly
3" plenum space required for installation of the remote driver box.

Optical System

Edge-lit LED technology uses light guided plate to distribute light
Polycarbonate lens provides even illumination throughout the space
Efficient system that can produce over 650 lumens while using 9W
Replaces 65W incandescent.

Life

Rated for 50,000 hours at 70% lumen maintenance.

Labels

CSA certified to US and Canadian safety standards
ENERGY STAR certified product
Suitable for wet location
Air-Loc certified in accordance with ASTM E283-2004
NOM Certified
Can be used to comply with California Title 24 Part 6 High Efficacy LED light Source Requirements
U.S. Patent No. 10,681,784.

Warranty 5-year limited warranty.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Lithonia Lighting > Lithonia Recessed Lighting > Lithonia WF Series Switchable Color Temperature Wafer LED Downlight