Lithonia WF6 SWW5 90CRI MB M6 6" LED Ultra-Thin Wafer Downlight, Switchable 2700K-5000K, 90 CRI, 970 Lumens, Matte Black

Home > BRANDS > Lithonia Lighting > Lithonia Recessed Lighting > Lithonia WF Series Switchable Color Temperature Wafer LED Downlight >

Alternative Views:

Our Price: $25.39

Usually Ships in 3-5 business days. Urgent Project? Contact Us.

Model: LITHONIA-WF6-1069700

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Housing

Polycarbonate injection molded outer frame, with steel back plate. Nonconductive dead-front trim design suitable for a wide range of applications and codes requiring a non-conductive lens
FT4 3-pin plenum rated cable connector to connect from module to remote driver box.
Steel spring clip for easy installation. 6" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 6 1/4 inches for this product. Can be installed from 3/8" to 1 1/2" ceiling thickness
Can be removed from below the ceiling for service or replacement

LED Light Engine

Switchable white color temperature from 2700K, 3000K, 3500K, 4000K, 5000K
90 CRI minimum
Color accuracy within 4 step McAdams Ellipse at the end CCT (2700K and 5000K), within 6 step McAdams Ellipse in the middle CCT (3000K, 3500K, and 4000K)
Dimming 100% to 10% with most standard incandescent dimers (see list of approved dimmers).

Driver

Connect directly to 120V Class-2 (CAN ICES-005 (B) / NMB-005 (B)) LED driver. 120V 60 Hz constant current driver provides noise free operation
IC rated driver with convenience of a switch to choose between 5 selectable color temperature options ranging from 2700K (warm white), 3000K, 3500K, 3000K, 4000K, or 5000K (daylight)
The isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6) 14 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly
2" plenum space required for installation of the remote driver box.

Optical System

Life

Labels

CSA certified to US and Canadian safety standards
ENERGY STAR certified product
Suitable for wet location
Air-Loc certified in accordance with ASTM E283-2004
NOM Certified
Can be used to comply with California Title 24 Part 6 High Efficacy LED light Source Requirements
U.S. Patent No. 10,681,784.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item: