Prescolite LF6SL-6LFSL20L40K8WT LED Recessed Lighting

Home > BRANDS > Prescolite >

Alternative Views:

Our Price: $292.35

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: PRESCOLITE-LF6SL-KIT1

Qty:

Technical Spec

Downloads

Technical Spec
APPLICATIONS:

LiteFrame LF6SL is a 6" specification grade LED lensed downlight that utilizes high efficiency LEDs to obtain color consistency, energy savings, and low maintenance costs. 50,000 hours minimum life up to 35ºC (95ºF) in open plenum applications.

HOUSING:

One-piece 22 gauge non-corrosive steel platform.
Pre-wired j-box with snap-on cover for easy access.
Snap-in- connection from driver compartment allows easy installation of light engine/trim assembly without tools above or below the ceiling and can be upgraded to accommodate technology improvements.
Approve for 8 (4 in/4 out) No. 12 AWG conductors rated for 90ºC through wiring.

REFLECTOR:

IP65 AND VR:

IP65 and vandal-resistant (VR) options are made of 16GA cold rolled steel stampings and come standard with a clear high impact polycarbonate lens.
Each option uses self tapping stainless steel screws painted to match the white trim color standard; tamperresistant screws are used on the VR option only.
The IP65 rated option is completely sealed without the use of silicone on standard non-porous ceiling surfaces.

LED LIGHT ENGINE:

The LF6SL uses the Philips Fortimo DLM LED Module.
This module provides controlled color consistency (3 SDCM) from fixture to fixture.
The system is designed for optimal life and lumen maintenance (>50,000 hours at 70% lumen maintenance).
Both reflector and light engine assembly are mechanically retained to housing.

LED DRIVER:

The LF6SL utilizes the Philips Fortimo LED Driver specifically designed to optimize efficiency of the Fortimo DLM Module.
Driver is designed to match the 50,000 hour minimum life expectancy of the system.
Meets UL Class 2, inherent short circuit protection, self limited, overload protected.
If critical temperatures are reached on driver or LED module, integrated thermal feedback loop will gradually reduce current to protect system life.
Driver is universal 120V-277V.
Optional Lutron Series A driver is also available.

DIMMING:

Comes standard with 0-10V dimming capability.
Flickerfree dimming to 10%. 0-10V control may consume up to 1mA. Lutron 2 wire, 3 wire, and EcoSystem dimming available to 1% and DMX with RDM (remote device management) dimming to less than 0.1%.

INSTALLATION:

Adjustable Bar hangers included. Universal adjustable mounting brackets also accept 1/2" EMT conduit or 1 1/2" or 3/4" lathing channel (by others) or Prescolite 24" bar hangers (B24 or B6).

CERTIFICATIONS:

WARRANTY:

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Prescolite