Peerless BRM9L LSL 4FT MSL4 80CRI 40K ID500LMF 70/30 DARK ZT 277 SCT F1/48A C110 Indirect or Direct LED Suspended, 4' Run Length, 4000K, 500 Lumens/Foot, 70% Up 30% Down, 0-10V, 277V, Single Circuit, T-Bar Ceiling, 48" Adj. Suspension, Painted Aluminum

Home > BRANDS > Peerless > Suspended > BRM9L >

Our Price: $843.56

Usually Ships in 3-5 business days. Urgent Project? Contact Us.

Model: PEERLESS-BRM9L-110850

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Housing

Nominal 8 1/4" x 1 3/4” rectangular housing is formed from cold-rolled steel.

End Caps
Die-cast end caps are mechanically attached with no exposed fasteners. Flat end caps standard.
For sculptured end caps, choose option SCEP.

Color
Color for housing and end caps is white, black or painted aluminum. Consult factory for custom colors.

Luminaire Length
Luminaire is available in 4', 5', 6', 8', 10' and 12' sections. Using internal joiners, any section combination can be joined to form longer rows with almost 1ft incremental lengths. Add 5/8" for each flat end cap and 4" for each sculptured end cap.

Source
Multiple LED lumen packages and five available color temperature options (2700K, 3000K, 3500K, 4000K and 5000K) -- all within 2.5 MacAdam ellipses.

Optics
Softshine optical system consists of high performance lens, diffusers and metal reflectors.

Dimming Driver
eldoLED driver provides "natural dimming" with smooth, continuous and flicker-free operation to 0.1% dim levels. Acuity luminaires incorporating eldoLED LED drivers perform within the recommended operating areas for flicker as a function of frequency and modulation (%) outlined in IEEE Standard 1789-2015 (IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers), in typical operating conditions at representative dimming levels. Syncing for controls: 2mA max.
THD: < 20%. Insignificant inrush current at 120 and 277VAC. FCC Class A and B tested for EMI and RFI
When Control Input of 0-10V is specified driver will be set for linear dimming curve, if NLIGHT is specified driver will be set for logarithmic dimming curve.

EldoLED Driver for MIN1 and DARK only nLight Air Wireless
The integrated API smart sensor is part of each luminaire in the nLight AIR network, which can be grouped to control multiple luminaires. The granularity of control with the digital PIR occupancy detection and daylight sensing makes a great solution for any application.
Optionally you can order nLight AIR less sensors for compatibility with an nLight Air wireless system.

Controls and System Networking Options
For wired networking via Cat-5e, choose an integrated nLight module. For daylight dimming and/or dual technology occupancy detection. See Integrated
Sensor Layout Page for more details.

Electrical
LED light engine -- consisting of modular LED boards and eldoLED dimming driver -- is rated for 60,000 hours (L80) at 25° C ambient temperature. Specify 120V or 277V. Pre-wired with 16AWG fixture wire.
For special circuiting or wire gauge, consult factory.
Plug-in electrical connectors included.

Environment
Suitable for damp location.

Validation
CSA/CUS listed. CSA tested to UL 1598 standards. LM-79 tested. Individual sections meet FCC Part 15 requirements. Lighting Facts partner.

Packaging
100% post-consumer recycled cardboard box and inserts. Biodegradable, protective luminaire bag. Recycled kraft paper tape.

Government Procurement
BAA -- Product with the BAA option qualifies as a domestic end product under the Buy American Act as implemented in the FAR and DFARS. Product with the BAA option also qualifies as manufactured in the United States under DOT Buy America regulations.
BABA -- Build America Buy America: Product with the BAA option also qualifies as produced in the United States under the definitions of the Build America, Buy America Act.
Please refer to www.acuitybrands.com/buyamerican for additional information.

Warranty
5-year limited warranty.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.

A+ Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

All configurations of this luminaire meet the Acuity Brands' specification for chromatic consistency
This luminaire is part of an A+ Certified solution for nLight control networks when ordered with drivers marked by a shaded background*
This luminaire is part of an A+ Certified solution for nLight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background*

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Peerless > Suspended > BRM9L