and other large indoor spaces with mounting heights up to 60'. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate.
Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.

CONSTRUCTION -- Lightweight aluminum heat sink designed to perform in ambient temperatures up to 55 degrees C with lumen droop less than fluorescent due to precision thermal engineering for maximum naturally convective cooling. Structural elements such as the channel and end caps are fabricated from steel for maximum rigidity. Hard-tooled reflectors, utilizing reflective Alanod MIRO-5 aluminum, for precise and repeatable photometry. Semi-diffuse lens optional to provide glare control – may be inverted for gloss or matte side down. Wireguard attachment points provided.

OPTICS -- Narrow and wide distributions available to meet both horizontal and vertical light level requirements. Reflectors feature precision-formed optics utilizing reflective Alanod MIRO-5 aluminum to achieve narrow distribution and white polyester powder coat to achieve wide distri bution. Semidiffuse lens optional to provide glare control and LED protection.

ELECTRICAL -- L95 at 60,000 hours (only 5% loss) with a predicted life of more than 100,000 hours. Utilizes a 90 degrees C case temperature driver for maximum life at high temperatures. 0.90 power factor and 10kA/10kV level of surge protection is standard. Available as 120-277V or 347-480V input.
0-10V dimming standard for a dimming range of 100% to 10%; dimming source current is 150 microA.

INSTALLATION -- Suitable for suspension by chain, cable, surface-mounting bracket, hook monopoint or single (pendant) monopoint. Surface mounting not recommended without optional surface mounting bracket. To maintain high ambient listing, fixture should be mounted at a minimum plenum height of 24".

LISTINGS -- CSA certified to US and Canadian safety standards. Damp location listed. Suitable for ambient temperatures from -40°F (-40°C) to 131°F (55°C) when suspended 24" from ceiling. Patent pending.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.
Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

GOVERNMENT PROCUREMENT -- BAA - Product with the BAA option qualifies as a domestic end product under the Buy American Act as implemented in the FAR and DFARS. Product with the BAA option also qualifies as manufactured in the United States under DOT Buy America regulations.

BABA -- Build America Buy America: Product with the BAA option also qualifies as produced in the United States under the definitions of the Build America, Buy America Act.
Please refer to www.acuitybrands.com/buy-american for additional information.

WARRANTY -- 5-year limited warranty.