Sure Lites APC7RGBK All-Pro Combination Exit and Emergency Light, No Remote Heads, Nicked Cadmium Battery, Field Selectable Red or Green, Black Housing

Home > BRANDS > Sure-Lites > Sure-Lites Combo Emergency Light and Exit Sign >

Alternative Views:

Our Price: $86.62

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: SURE-LITES-APC7RGBK

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Illumination Source Data

Long life LEDs provide uniform, diffuse illumination for the EXIT face
RG models have field selectable red or green LEDs
LED sources are brighter in emergency mode
3.6V, 0.78W Long life LED heads provide up to 17 feet egress coverage

Electrical

Dual voltage input 120/277VAC, 60Hz
3.6V, 0.78W DC long lasting LED heads
Line-latching
Solid-state voltage limited charger
Solid-state switching
Brownout protection
Low voltage disconnect
Overload/short circuit protection
Test switch / power indicator light
High power remote option available capable of running two additional APWR 3.6V, 0.78W remote emergency lights

Housing Construction

All components are injection molded, color stable, high impact, 5VA flame resistant, thermoplastic housing
UV stabilized to resist discoloration due to age and ultraviolet radiation
APC7RG/APCH7RG series LEDs and lens panels are field selectable red or green. APC7RG/APCH7RG series come with LEDs set to â€œredâ€ with red inserts installed. The APC7RG/APCH7RG series and can be easily converted to "green" LEDs and inserts in the field.
Available in white or black textured finish
Components are of snap-fit construction to facilitate under 5-minute installation
Reinforcing ribs throughout to provide maximum strength connections
Molded-in wireways facilitate internal wire routing and connections
All components including battery and electronics are located inside the exit housing
Snap-out or snap-in chevron directional indicators have full 3/4" stroke
Universal exits can be field configured as single face or double face
Snap-fit canopy with mounting screws included with all exits
Exit can be ceiling, wall, or end mounted
Universal J-box mounting pattern
Operating temperature range 10Â°C to 40Â°C Solid-State Charger
120/277 VAC, voltage regulated solid-state charger
High charge rate immediately following power restoration of AC current after a power failure
Charge circuit reacts to the condition of the battery and regulates the charging process in order to maintain peak battery capacity and maximize battery life
Solid-state construction recharges the battery following a power failure in accordance with UL 924

Brownout Circuit

Monitors the flow of AC current
Activates the emergency lighting system when a predetermined reduction/dip of AC power occurs (a dip in voltage will cause most ballasted products to extinguish, causing loss of normal lighting even though a total power failure has not occurred)

Test Switch/Power Indicator Light

Switch located on the bottom of the exit permits the activation of the emergency circuit for complete operational systems check
Indicator light provides visual assurance that the AC power is on

Line-Latched

AC activated load switch prevents lamps from turning on during installation to a non-energized AC circuit
Eliminates need of contractor to return to job site to connect batteries when buildingâ€™s main power is turned on

Low Voltage Disconnect