Halo Recessed HLB3LSFS5 3' Round Slim Canless LED Downlight, Selectable 670/885/1065 Lumens, 90 CRI, Field Selectable CCT 2700/3000/3500/4000/5000K, 5% Phase Cut LE/TE Dimming, 120V 60Hz, Matte White

PRODUCT SPECIFICATIONS

Selectable System

• Use the 5-color selector switch to choose between: 2700K, 3000K, 3500K, 4000K,
  and 5000K
• Factory default is set to 3000K
• Use Lumen Select switch to choose the brightness level (low-medium-high)
• Lumen select factory default is set to the highest lumen option
  

Module -- Trim

• Module construction includes LED array, heat sink, reflector, prismatic lens, and die-cast aluminum trim ring
• Heat sink designed to conduct heat away from the LED array, keeping the junction
  temperatures below specified maximums, even when installed in insulated ceiling
  environments
• Achieves L70 at 50,000 hrs in IC (insulation contact) and non-IC applications
  

LED Array

• Mid power LED array provides a uniform source with high efficiency and no pixilation
• 90 CRI minimum, R9 greater than 50
• Color accuracy at 3 SDCM at the end points and 4 SDCM in the middle, provide excellent color quality and uniformity
  

Optical Assembly

• Precision acrylic light guide organizes source flux into wide distribution with 1.4 spacing criteria, useful for general area illumination
  Airtite
• The downlights meet Airtight ASTM-E283 requirements without gasket
  

Driver

• Integral 120V 60 Hz constant current driver provides noise free operation
• Continuous, flicker-free phase cut (leadingedge/ trailing-edge - LE/TE) dimming from
  100% to 5% output with compatible dimmers
• See this fixture’s Dimming Guide for compatible dimmers. www.cooperlighting.com
• Tip: for optimal dimming performance, consider dimmers with low-end trim
  adjustments. Note that some dimmers require a neutral wire in the box.
  • Wiring: Includes quick connect push connectors for mains power connection.
  • Aluminum driver / junction box with captive hinged junction box cover
  • Listed for (6) #12 AWG 90˚ C splice conductors, 2-in, 2-out plus (2) ground
  • (2) 1/2" conduit pry-outs
  • (2) Slide-N-Side™ non-metallic (NM) wire traps
  • Accepts 14-2, 14-3, 12-2, 12-3 U.S and 14-2, 14-3, 12-2 Canadian NM cable
  • (3) 4-port push wire nuts with clear caps for quick and reliable mains voltage connections
  • Integral keyhole mounting slots facilitate direct mounting to building structure or new construction mounting frame
    

Installation

• Can be installed in 1/2" to 1-1/4" thick ceilings
  

Retention

• Cutout dimension = 3.25" hole
• No additional housing or junction box required (Not for installation in recessed cans)
• The included remote driver / junction box may be used in direct contact with insulation
• Installer must cut hole and install fixture into aperture with the clips compressed
• New Flip-N-Klip springs lock in the up position for easy installation. During installation Flip-NKlip arm will come in contact with opening and automatically engage to lock the fixture in place
• For new construction applications, use HALO Canless Mounting Frames or Smash Plates prior to drywall installation
  

Gasket

• Closed cell gaskets achieve restrictive airflow requirements without additional caulking

Mounting Frame

• Galvanized steel mounting frame with offset aperture and integral bar hanger receivers
• Locking screws provide positive horizontal locking
• Captive thumbscrews provide toolless attachment of the fixture's remote driver/ junction box to the mounting frame for wiring during rough-in phase
• 3/8" drywall collar included to improve hole locating and drywall cutting process
• Collar is notched at 90° intervals for laser centering
• GOT NAIL! Gen 3 bar hangers adjust from 8" to 24" wide
• Pass thru feature allows shortening without removal
• Captive nail penetrates standard and engineered lumber
• Mounting flange levels platform with ceiling
• Integral clip attaches directly to tee-bar.

Emergency Mini Inverter

• Provides 90 minutes of 25VA emergency power to lighting fixtures
• Auto dimming allows up to 25VA max dimmable load
• 25VA max non-dimmable load
• Automatic 120VAC output power to driver or ballast means easy field install
• UL924 and CSA 22.2 No.141 listed for field or factory installation
• Remote mounting up to 250 feet
• Maintenance free lithium-ion battery
• See Mini Inverter Spec Sheet for more information
  

Compliance

• UL Certified US and Canada Type IC suitable for direct contact with air permeable insulation
• Not recommended for use in direct contact with spray foam insulation, reference NEMA LSD57-2013
• Wet location listed and IP44 ingress protection
• Airtight per ASTM-E283-04
• Suitable for use in clothes closets when installed in accordance with the NEC 410.16
  spacing requirements
• EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
• Contains no mercury or lead and RoHS compliant (1)
• Photometric testing in accordance with IES LM79-08
• Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
• Can be used for State of California Title 24 high efficacy luminaire compliance.
• Complies with Title 24 JA8-2025-E. (1)
• Can be used International Energy Conservation Code (IECC) high efficiency luminaire
  compliance.
• ENERGY STAR® certified, reference "Certified Light Fixtures" database
  

Warranty

• Five-year limited warranty